3 before using the printer, the printer drivers and status monitor software must be installed. The software is on the software installation cd-rom included with your printer. Installation instructions are included for printers connected to computers by a usb cable or a parallel cable. Oki data recom...
4 install the driver 1. Make sure the usb cable is connected to your printer and pc and your printer is turned off . 2. Insert the software installation cd, supplied with your printer, into your cd-rom drive. The cd will autorun. (if it doesn’t, click start → run → browse . Browse to your cd-rom dri...
5 install the driver 1. Make sure the usb cable is connected to your printer and pc and your printer is turned off . 2. Insert the driver cd supplied with your printer into your cd-rom drive. The cd will autorun. (if it doesn’t, click start → run → browse . Browse to your cd-rom drive and double-cli...
6 install the driver 1. Make sure the usb cable is connected to your printer and pc and your printer is turned off . 2. Insert the driver cd supplied with your printer into your cd-rom drive. The cd will autorun. (if it doesn’t, click start → run → browse . Browse to your cd-rom drive and double-cli...
7 install the driver 1. Make sure the usb cable is connected to your printer and pc and your printer is turned off . 2. Insert the software installation cd supplied with your printer into your cd-rom drive. The cd will autorun. (if it doesn’t, click start → run → browse . Browse to your cd-rom drive...
8 install printer driver 1. Check that the cable is installed. 2. Turn the printer on. 3. Insert the cd into your cd-rom drive. The cd will autorun. ( if it doesn’t, click start → run → browse . Browse to your cd-rom drive and double-click install.Exe, then click ok .) 4. The licence agreement appea...
9 installing printer drivers two printer drivers are available: • a fast-parallel driver (recommended), which provides faster printing. To use this driver, make sure the ecp setting in your system bios is enabled. See your computer’s manual for information on how to do this. • a logo driver, which i...
10 the status monitor is your on-screen control panel where you can monitor printer operation and control and change printer settings. To open the status monitor click start/programs/okib4200/ okib4200 status monito r. The current printer status is shown. Note: click the maximize button to expand th...
11 the b4200 operator panel consists of a control button and 4 led indicators. Control button use the control button ( 1 ) to: • turn the printer on-line/off-line. • resume printing after a paper error, or print overrun. • interrupt/resume data processing. Led indicators the leds show the status of ...
12 oki is a registered trademark of oki electric industry company, ltd. Microsoft, internet explorer and windows are either registered trademarks or trademarks of microsoft corporation in the united states and other countries. Oki data americas, inc., 2000 bishops gate blvd., mt. Laurel, nj 08054-46...
