3 before using the printer, the printer software drivers must be installed. The software is on the cd-rom included with your printer. Installation instructions are included for printers connected to computers by a usb cable or a parallel cable. Oki data recommends using a usb connection, as your pri...
4 install the drivers and status monitor before you start the install, be sure the usb cable is connected to your printer and pc, and your printer is powered off. 1. Check that the usb cable is plugged in. 2. Turn the printer on. 3. Windows add new hardware wizard displays. Click next . 4. Select se...
5 install the driver before you start the install, be sure the usb cable is connected to your printer and pc, and your printer is powered off. 1. Turn the printer on. 2. Found new hardwarewizard displays. 3. Insert the cd into the cd-rom drive. 4. Select install from a list or specific location... C...
6 install the driver before you start the install, be sure the usb cable is connected to your printer and pc, and your printer is powered off. 1. Turn the printer on. 2. Found new hardware wizare displays. Click next . 3. Select search for a suitable driver... Click next. 4. Insert the cd into your ...
7 install the usb driver before you start the install, be sure the usb cable is connected to your printer and pc, and your printer is powered off. 1. Turn the printer on. 2. Add new hardware wizard displays. Select “specify the location of the driver.” click next . 3. Insert the cd into the cd-rom d...
8 install printer drivers 1. Check that the cable is installed. 2. Turn the printer on. If the new hardware found wizard displays. Click cancel. 3. Insert the cd into your cd-rom drive. The cd will autorun. ( if autorun is set off, click start → run → browse . Browse to your cd-rom drive and double-...
9 installing printer drivers two printer drivers are available: • an ecp-enabled driver (recommended), which provides faster printing. To use this driver, make sure the ecp setting in your system bios is enabled. See your computer’s manual for information on how to do this. • a logo driver, which pr...
10 the status monitor is your on-screen control panel where you can monitor printer operation and configure features. To open the status monitor click start/programs/okib4200/ okib4200 status monito r. The status monitor displays. If the status monitor minimized view appears, click the maximize icon...
11 the b4200 operator panel consists of a control button and 4 led indicators. Control button use the control button (1) to: • turn the printer on-line/off-line. • resume printing after a paper error, or print overrun. • interrupt/resume data processing. Led indicators the leds show the status of yo...
12 oki is a registered trademark of oki electric industry company, ltd. Microsoft, internet explorer and windows are either registered trademarks or trademarks of microsoft corporation in the united states and other countries. Oki data americas, inc., 2000 bishops gate blvd., mt. Laurel, nj 08054-46...
