Oki B4200 Software Installation Manual - Usb Install: Windows
7
INSTALL THE USB DRIVER
Before you start the install, be sure the USB cable is
connected to your printer and PC, and your printer is
powered off.
1. Turn the printer on.
2. Add New Hardware Wizard displays. Select “Specify the
location of the Driver.” Click
Next
.
3. Insert the CD into the CD-ROM drive.
4. Select
Removable Media...
Click
Next.
5. The USB driver is located. Click
Next
.
6. Click
Finish
.
7. Add New Hardware Wizard displays. Click
Cancel
.
INSTALL THE PRINTER DRIVER AND STATUS
MONITOR
1. With the CD installed in your CD-ROM drive, click
Start
→
Run. Browse
to your CD-ROM Drive and double-click
Install
. Click
OK
.
2. The Licence Agreement appears. Click
I Accept
. Click
Next
.
3. The Menu Installer displays. Click the
Printer
Software
button.
4. Complete the installation following the on-screen
instructions.
SELECT THE USB PORT AND
PRINT A TEST PAGE
1. Click
Start
→
Settings
→
Printers
. Right-click the OL4200
icon, then click
Properties
. Click the
Details
tab.
2. Scroll down and select
USB001
in the
Print to the following
port
list. Click
Apply
.
3. Click the
General Tab
.
4. Click the
Print Test Page
button. Click
OK
to exit.
Open the Status Monitor
Click
Start
→
Programs
→
OKIB4200/OKIB4200 Status
Monitor.
See “Using the Status Monitor” on page.10.
View the On-line User’s Guide
In order to open the on-line User’s Guide, you must have
Acrobat Reader installed.
1. Insert the CD into your CD-ROM drive.
2. Click
Star
→
Run
→
Browse
. Browse to your CD-ROM
drive and double-click Install.exe. Click
OK
.
3. The License Agreement appears. Click
I Accept
. Click
Next
.
4. The Menu Installer appears.
5. Click
View User’s Guide
or
Install User’s Guide
.
USB Install: Windows
®
Me