Memory dimm installation instructions dimm part number 64mb: 70040901 128mb: 70041101 256 mb: 70041201 512 mb: 70041901.
1 every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki data assumes no responsibility for the results of errors beyond its control. Oki data also cannot guarantee that changes in software and equipment made by other manufacturers and r...
2 getting started the printers have four sockets for memory dimm boards. You can expand the printer’s memory up to 1 gb by installing two 512-mb dimms. To achieve the 1 gb memory in most models, you will need to replace the dimm(s) provided with 512 mb dimms. The printer will not acknowledge more th...
3 prepare the printer 1. Turn off the printer and unplug the power cord. 2. Detach the interface cable from the printer. 3. Remove and save the thumbscrew at the top and bottom which hold the control board in place. C7100/c7300/c7500 c9300/c9500
4 4. Grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer. C7100/c7300/c7500 c9300/c9500
5 install the dimm(s) 1. Locate the dimm sockets (circled) on the control board. 2. Push out the white lock tabs at either end of the dimm socket. Caution! Circuit boards can be damaged by static electricity and rough handling. To avoid damage, ground yourself (touch metal) before handling dimms..
6 3. Remove the dimm from its shipping package. 4. Align the dimm with the narrow strip (1) on its metallic contact edge toward the front of the control board, then carefully insert the dimm in the socket. Press down firmly, until you feel the board engage the connector, then raise the white tabs to...
7 complete the installation 1. Align the bottom of the control board with the track in the printer and slide it back into place. C7100/c7300/c7500 c9300/c9500
8 2. Reinstall the thumbscrews at the top and bottom of the board. 3. Reattach the computer interface cable. 4. Plug the power cord into the power outlet and turn on the printer. C7100/c7300/c7500 c9300/c9500
9 check for proper installation generate a menumap printout and check to be sure that the dimms are properly installed. 1. Press menu once or twice until information menu appears on the display. 2. Press select. Print menu map appears on the display. 3. Press select. The menumap prints. 4. Check the...
10 change the memory setting in the driver(s) windows ® adobe ® postscript ® driver 1. Click start — settings — printers . The printers dialog box opens. 2. Right click the appropriate oki postscript driver icon, then click properties . 3. Windows 2000 & nt 4.0: a. Click the device settings tab. B. ...
11 macintosh® driver (osx) 1. As of os 10.1.5, apple has not enabled printer options adjustment. Therefore, this selection is unavailable. Macintosh ® driver 1. Activate chooser from the apple menu. 2. Select laserwriter 8 . 3. Click printer — setup . 4. Click configure . 5. Change the memory config...
12 limited warranty oki data americas, inc. (oki data) warrants this option to be free from defect in material and workmanship and will remedy any such defect according to the terms of this limited warranty. Oki data will repair (or at its option, replace) at no charge, any defective part(s) of the ...
13 warranty period described above of one (1) year. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Oki data shall not be responsible or liable for any special, incidental or consequential damages or loss arising from the use ...
14 oki data service depot information united states oki data americas, inc. 2020 bishops gate blvd. Mt laurel, nj 08054 tel: 1-800-654-3282 fax: 1-856-222-5247 canada oki data americas, inc. 2735 matheson blvd. East, unit 1 mississauga, ontario canada l4w 4mb tel: 800-654-3282 fax: 905-238-4427 mexi...
15 oki data americas, inc. 2000 bishops gate blvd. Mt. Laurel, nj 08054-4620 tel: (800) 654-3282 fax: (856) 222-5320 http://www.Okidata.Com dimm install guide: 58365101.
