Oki C7300 Series Replacement Instructions

C7100/7300/C7500 

Transfer Belt

Replacement Instructions

58397201

Caution! The fuser unit (at the 

back of the printer) may be 

HOT. Let it cool down before 

attempting to replace the trans-

fer belt.

1.Turn off the printer.

2. Pull up on the handle and lift 

the cover.

3. Lift out the drum/toner 

cradle.

4. Press back on the lock lever 

(circled) and, while holding 

the lock lever, lift the end of 

the transfer belt unit up by 

the blue handle (squared).

5. Grasp both handles and lift 

the transfer belt unit out of 

the printer. Discard in 

accordance with local 

regulations.

Caution!  Make sure the blue 

lock levers at either end of the 

fuser have snapped back lock-

ing the fuser unit in place. If 

not, pull them toward the front 

of the printer.

6. Unpack the new transfer belt 

unit.

Caution! Be careful to avoid 

touching the shiny black sur-

face of the transfer belt.

7. Hold the transfer belt by the 

handles and lower it into the 

printer, carefully aligning the 

pins at the front of the belt 

into the slots at the front of 

the printer.

8. Using the blue handle, firmly 

push the unit into place until 

it clicks.  If necessary, pull 

the blue lock lever (circled) 

toward the front of the 

printer to lock the transfer 

belt into place.

9. Place the drum/toner cradle 

back into the printer.

10.Close the cover and turn on 

the printer.

Limited Warranty: United States

Oki Data Americas, Inc. (Oki Data)