1. DL manuals
  2. Oki
  3. Storage
  4. C7300 Series
  5. User Manual

Oki C7300 Series User Manual

Manual is about: Macintosh

Summary of C7300 Series

  • Page 2

    Okilan 6200e plus 2 contents important note ............................................ 11 setting the printer's ip address .................. 12 setting the ip address from the printer's front panel ................................................................ 12 advanced management features .....

  • Page 3

    Okilan 6200e plus 3 configuring the network print server using jetad- min .................................................................. 32 hp web jetadmin support .............................. 34 web jetadmin overview .................................. 34 configuring the network print server u...

  • Page 4

    Okilan 6200e plus 4 netware port configuration options ................ 49 tcp/ip configuration options .......................... 49 ethertalk configuration options ....................... 49 output port configuration options .................... 49 snmp configuration options .........................

  • Page 5

    Okilan 6200e plus 5 using the network print server in ndps (net- ware 4.X, 5.1, and 6.X) .................................... 73 ndps introduction ............................................ 73 adding the oki printer driver using ndps broker 74 setting up the network print server through nwadmin32 ...

  • Page 6

    Okilan 6200e plus 6 running okinet for tcp/ip ............................... 99 configuring the network print server using okinet for tcp/ip ..................................................... 100 configuring tcp/ip options ........................... 101 netware and netware port configuration op...

  • Page 7

    Okilan 6200e plus 7 restoring the network print server to factory de- faults ............................................................. 128 unable to assign ip address .......................... 129 hardware error messages .............................. 132 printing a configuration page ............

  • Page 8

    Okilan 6200e plus 8 lan manager/lan server overview .............. 166 system requirements .................................... 166 installation ....................................................... 167 installation overview ....................................... 167 network preparation ............

  • Page 9

    Okilan 6200e plus 9 lpr printers using ip ..................................... 184 ethertalk support for apple macintosh .... 185 introduction ..................................................... 185 ethertalk support for apple® macintosh:® over- view .................................................

  • Page 10

    Okilan 6200e plus 10 network print server setup for windows nt 4.0/ 2000/xp .......................................................... 201 windows nt/2000/xp overview ..................... 201 using active directory™ with windows 2000/xp server ..........................................................

  • Page 11: This Is Required By The Fcc.

    Okilan 6200e plus user’s guide important note 11 important note in order to reduce electromagnetic interference— ”noise” that interferes with tvs or other appliances— you must put the enclosed ferrite core on the network cable connected to your printer. This is required by the fcc. Here’s how to do ...

  • Page 12: Printer'S Front Panel

    Okilan 6200e plus user’s guide setting the printer's ip address 12 setting the printer's ip address setting the ip address from the printer's front panel to change the printer's ip address from the printer's front panel: 1. Press menu repeatedly until the network menu appears on the display. 2. Pres...

  • Page 13: Snmp

    Okilan 6200e plus user’s guide advanced management features 13 advanced management features snmp snmp overview simple network management protocol (snmp) pro- vides network administrators with the ability to com- municate management functions between an snmp manager and an snmp agent. An snmp manager...

  • Page 14: Traps

    Okilan 6200e plus user’s guide advanced management features 14 over 150 configuration and status variables for the net- work protocols, printer ports, network interfaceprinter settings, and the overall network print server status. Printer status traps such as on-line, off-line, detached printer and ...

  • Page 15: Security

    Okilan 6200e plus user’s guide advanced management features 15 reset. An authentication failure trap is sent when the network print server receives an snmp trap get or set request with an incorrect community name. The network print server sends printer traps when there is a change in the status of t...

  • Page 16: Network Print Server Web

    Okilan 6200e plus user’s guide advanced management features 16 both the okinet for tcp/ip and the ipx, and the net- work print server configuration utility (telnet) allow you to specify the community names and a trap desti- nation ip address. Network print server web configuration web configuration ...

  • Page 17: Port Number.

    Okilan 6200e plus user’s guide advanced management features 17 connecting to the network print server 1. Enter http:// in the browser address prompt. The http address can be the ip address, the system name if the print server has been configured to use wins, or the dns name if registered with a dns ...

  • Page 18: Configuration

    Okilan 6200e plus user’s guide advanced management features 18 note: by default, only status and support informa- tion can be viewed. To configure the print server, see the configuration section. The print server pages are normally displayed in a frame with two panes. The left pane shows all the top...

  • Page 19

    Okilan 6200e plus user’s guide advanced management features 19 2. On the enter network password screen, enter the user name and password. The default administra- tor user name is admin. The default administrator password is okilan—note that the password is case sensitive. We suggest that the print s...

  • Page 20

    Okilan 6200e plus user’s guide advanced management features 20 note: all values (except as noted on the following pages*) are configured exactly the same as in the okinet utility. Please refer to okinet for tcp/ip for instructions on configuration. 4. Select the submit changes button at the bottom o...

  • Page 21: Web Admin Configuration

    Okilan 6200e plus user’s guide advanced management features 21 immediately or wait until all configuration is complete before resetting. If you do not reset immediately, a link will appear at the top of all subsequent configuration pages reminding you to reset the server. * the following values are ...

  • Page 22: Status

    Okilan 6200e plus user’s guide advanced management features 22 • faq url - by default points to the faq page on the oki web server. Maximum url length is 63 characters. • updates url - by default points to the firm- ware update site on the oki ftp server. Maxi- mum url length is 63 characters. • cus...

  • Page 23: Contact

    Okilan 6200e plus user’s guide advanced management features 23 contact this page provides the necessary addresses and phone numbers for contacting oki data customer support. Faq by default this link will connect you to the faq page on the oki web server. This link can be configured to point to other...

  • Page 24: Printer Menu

    Okilan 6200e plus user’s guide advanced management features 24 the restore selected protocols button. All protocols can be restored simultaneously by selecting the restore all protocols button. Printer menu the printer menu includes the following pages for monitoring and configuring your network pri...

  • Page 25: System Config Menu

    Okilan 6200e plus user’s guide advanced management features 25 • paper size check - enables or disables the paper size check function. • priority tray - this field is used to set which tray receives top priority. • resolution - this field is used to set printer resolution in dots per inch. • mono pr...

  • Page 26: Interface Menu

    Okilan 6200e plus user’s guide advanced management features 26 • error report • auto registration interface menu this menu allows you to enable or disable the printer's parallel or usb interface. It includes the following set- tings: parallel menu • parallel port • bi-directional input/output • ecp ...

  • Page 27: Usage

    Okilan 6200e plus user’s guide advanced management features 27 usage this menu displays the following printer life-cycle information: • percentage of toner remaining • drum usage • page counts • belt usage • fuser usage network print server discovery an html file containing links to all network prin...

  • Page 28: Information.

    Okilan 6200e plus user’s guide advanced management features 28 note: this file does not update automatically. The okinet utility must be run again to obtain current information. Troubleshooting server connection • the print server only supports two simultaneous http connections. If your browser fail...

  • Page 29: Configuration

    Okilan 6200e plus user’s guide advanced management features 29 configuration • web browsers will generally cache previously viewed web pages on the local machine. To view the most current print server information, it is a good idea to select the reload or refresh button on your browser instead of us...

  • Page 30: Okinet For Nds

    Okilan 6200e plus user’s guide advanced management features 30 for bi-directional capable printers the network print server can retrieve the printer information, such as front panel message, and display it through the okinet utilities. Okinet for nds okinet for nds allows administrators to create an...

  • Page 31: Hp Jetadmin Support

    Okilan 6200e plus user’s guide advanced management features 31 this concept is known as peer-to-peer printing and is sometimes referred to as serverless printing, because it can bypass the network file server. From a windows operating system, using tcp/ip, ipx direct or dlc protocols, the okinet con...

  • Page 32: Tation.

    Okilan 6200e plus user’s guide advanced management features 32 note: for more information on installing and using hp jetadmin, refer to the hp jetadmin documen- tation. Configuring the network print server using jetadmin note: screens and prompts may vary, depending on the version of jetadmin you ar...

  • Page 33: Added, Click Ok.

    Okilan 6200e plus user’s guide advanced management features 33 7. Select the desired queues from the list of available queues to be added into service. Click the service button to move the selection to the serviced queues column. When all queues have been added, click ok. 8. Click ok again to return...

  • Page 34: Hp Web Jetadmin Support

    Okilan 6200e plus user’s guide advanced management features 34 obtaining diagnostic information using jetadmin 1. From the main jetadmin screen, select the net- work print server port on which you wish to view diagnostic information. 2. Select properties from the device menu. 3. From the properties ...

  • Page 35: Network Print Server

    Okilan 6200e plus user’s guide advanced management features 35 2. On the properties page, click the config button. 3. Make any necessary changes to the options listed and click the corresponding apply button. Installing a windows nt printer for the network print server 1. From the main web jetadmin ...

  • Page 36: Network Print Server

    Okilan 6200e plus user’s guide advanced management features 36 7. On the install printer page 4 page, enter a name for the printer in the select printer name field and click the install printer button. 8. Users in the domain can now print to the new printer. Obtaining diagnostic information from the...

  • Page 37: Overview

    Okilan 6200e plus user’s guide web configuration utility 37 web configuration utility okinet web configuration utility overview this section contains instructions and information on how to configure and manage your network print server using the okinet web configuration utility. The okinet web confi...

  • Page 38: Address In The Address Box

    Okilan 6200e plus user’s guide web configuration utility 38 from the directory where the oki java files are installed. The security warning dialog box appears on your browser. 2. Click yes on the security warning dialog. The oki data discovery applet is installed. The okinet web configuration utilit...

  • Page 39

    Okilan 6200e plus user’s guide web configuration utility 39 5. Double-click on the printer you wish to monitor or configure. The print server home page appears. The print server pages are normally displayed in a frame with two panes. The left pane shows all the top level menus along with links to th...

  • Page 40: Options

    Okilan 6200e plus user’s guide web configuration utility 40 menu items normally shown in the left pane can be accessed by using the menu links that appear at the bottom of the page. Options the options button (above the help button) should appear if your browser allows cookies and javascript. Option...

  • Page 41: Introduction

    Okilan 6200e plus user’s guide novell netware 41 novell netware introduction this section contains instructions and information on how to configure your network print server in the net- ware environment. Using the network print server with imanager and iprint (netware 5.X and 6.X) note: for detailed...

  • Page 42: Administrator Rights.

    Okilan 6200e plus user’s guide novell netware 42 to use iprint, a client workstation requires: • windows 95/98/me or windows nt/2000/xp note: in windows nt/2000/xp, you must have administrator rights. • a web browser with java script enabled and either internet explorer 5.0 or later, or netscape 4.7...

  • Page 43: Not Ascii Text.

    Okilan 6200e plus user’s guide novell netware 43 issue, since it is possible to make a global change in the directory service or pconsole utility so that banner pages are created in postscript, and not ascii text. Before you start • you should be familiar with network administration as well as the p...

  • Page 44: Okinet For Netware

    Okilan 6200e plus user’s guide novell netware 44 okinet for netware okinet for netware overview this section contains information about how to config- ure the network print server in bindery and nds envi- ronments using the okinet for netware utility. Feature pserver mode rprinter/nprinter mode user...

  • Page 45: Running Okinet For Netware

    Okilan 6200e plus user’s guide novell netware 45 note: okinet for netware contains minimal nds configuration support. For more extensive config- uration options, use the okinet for nds utility. Okinet for netware allows you to: • configure the network print server for all sup- ported protocols • dis...

  • Page 46: Okinet For Netware

    Okilan 6200e plus user’s guide novell netware 46 by default, the all print servers view is selected and all print servers attached to the network from which the okinet utility is running are listed. Configuring the network print server using okinet for netware the following steps outline how to conf...

  • Page 47: Pserver Or Rprinter Mode

    Okilan 6200e plus user’s guide novell netware 47 pserver or rprinter mode several factors should be considered when choosing between pserver or rprinter mode. For more detailed information regarding these modes, see selecting pserver or rprinter/nprinter mode. Bindery settings • default file server ...

  • Page 48: Via Okinet For Netware.

    Okilan 6200e plus user’s guide novell netware 48 • preferred file server - this is the file server on which the print server object was created. • preferred tree - this is the nds tree on which the nds print server object was created. • print server name - the fully qualified (canonical) name of the...

  • Page 49: Tcp/ip Configuration Options

    Okilan 6200e plus user’s guide novell netware 49 netware port configuration options to modify the netware port settings to fit your net- ware printing environment, select the netware port file tab. Tcp/ip configuration options to modify configuration settings specific to the tcp/ip protocol such as ...

  • Page 50: Port Number

    Okilan 6200e plus user’s guide novell netware 50 port number select the port you wish to configure. Name field enter a descriptive name to identify the port. Language switching each output port can be configured to perform the fol- lowing language switching options: off, pcl, post- script or automat...

  • Page 51: Option Should Be Set to Off.

    Okilan 6200e plus user’s guide novell netware 51 • pcl - inserts the appropriate character string in front of each print job to switch the printer to the pcl print language. • postscript - inserts the appropriate character string in front of each print job to switch the printer to the postscript pri...

  • Page 52: Postscript Switch Sequence

    Okilan 6200e plus user’s guide novell netware 52 postscript switch sequence enter the character string to switch the printer to the postscript print language. Configuration page language select the appropriate printer language for printing configuration pages on your printer. Note: do not set the co...

  • Page 53: System Name

    Okilan 6200e plus user’s guide novell netware 53 to configure snmp specific information, select the snmp file tab. The following screen will display: note: snmp options need to be configured only if you are managing network print server products or getting system information using snmp. Fill in the ...

  • Page 54: System Location

    Okilan 6200e plus user’s guide novell netware 54 system location enter a description of the network print server loca- tion. Get community name this field is used to set the community name required to get information from the print server. The default community name is public. Note: to use the jetad...

  • Page 55: Snmp Traps Configuration

    Okilan 6200e plus user’s guide novell netware 55 snmp traps configuration the snmp trap option allows configuration of traps. Traps are unsolicited information concerning the net- work print server. Traps can be sent to an snmp manager or be broadcast to all hosts on the local seg- ment. To configur...

  • Page 56: Trap Destination

    Okilan 6200e plus user’s guide novell netware 56 trap destination • netware protocol - enter the network number and hardware address, respectively, to which traps will be sent. To broadcast traps to all addresses on all networks, enter ffffffff (8 characters) in the first field and ffffffffffff (12 ...

  • Page 57: Saving The Configuration

    Okilan 6200e plus user’s guide novell netware 57 • door open • printer error note: toner low, paper jam and door open require the printer to be set in pcl or auto mode. Saving the configuration once all settings have been defined, select ok. The settings will be saved and you will be returned to the...

  • Page 58: Output Ports

    Okilan 6200e plus user’s guide novell netware 58 • network • statistics • technical support • system printing a configuration sheet the configuration sheet provides current network, print server and printer information. To print a configuration sheet, select the network print server from the list of...

  • Page 59: Tcp/ip

    Okilan 6200e plus user’s guide novell netware 59 tcp/ip restores settings specific to the tcp/ip protocol con- figuration such as the ip address and subnet mask. Netware restores settings specific to the netware protocol configuration such as the mode and default file server. Ethertalk restores sett...

  • Page 60: Selecting An Existing View

    Okilan 6200e plus user’s guide novell netware 60 creating a new customized view to create a new view, select the new option from the view menu. Enter a name for the new customized view. Define filters, sorts, column, search informa- tion and refresh rates (see modifying view settings for more detail...

  • Page 61: Search Filter

    Okilan 6200e plus user’s guide novell netware 61 search filter the search option defines the criteria for locating net- work print server products on the network. • search local network - this method searches the bindery to locate all okilan products on the network. All print servers that respond ar...

  • Page 62: Sort

    Okilan 6200e plus user’s guide novell netware 62 sort the sort option displays the network print server list in a specific order. The list can also be sorted by click- ing on the column by which you wish to sort. A sort order can only be defined on columns displayed on the main okinet for netware sc...

  • Page 63: Information

    Okilan 6200e plus user’s guide novell netware 63 such as network traffic and desire for most recent information. For example, if traffic is not an issue on your network and the most current information is desired, set the refresh rate to 1 so the screen is updated every minute. If network traffic is...

  • Page 64: Get Community Name

    Okilan 6200e plus user’s guide novell netware 64 get community name enter the get community name necessary to access the network print server or group of servers selected. Set community name enter the set community name necessary to access the network print server or group of servers selected. Add s...

  • Page 65

    Okilan 6200e plus user’s guide novell netware 65 the network print server supports netware nds using novell embedded systems technology, also known as nest. Okinet for nds can be installed to support novell net- ware version 4.1 or 4.11 and for operating systems running windows 3.X, windows 95/98/me...

  • Page 66: Netware 4.1

    Okilan 6200e plus user’s guide novell netware 66 installing okinet for nds for novell netware 4.1 a single installation is required to service windows 3.X and windows 95/98 operating systems with okinet for nds for novell netware 4.1. Okinet for nds must be installed in the same location you have in...

  • Page 67: And Windows Nt/2000/xp

    Okilan 6200e plus user’s guide novell netware 67 tip for advanced administrators when installing okinet for nds, the install utility cop- ies the okinet for nds files to the destination direc- tory, adds the oki print server class to the nds schema and modifies the user’s nwadmin.Ini file. Installin...

  • Page 68

    Okilan 6200e plus user’s guide novell netware 68 be found in the sys:\public\win95 or sys:\pub- lic\winnt directory. To install okinet for nds for novell netware version 4.X, 5.X, 6.X, windows 95/98/ me, and windows nt/2000/xp: 1. Login to the directory tree as a user with admin rights at the root o...

  • Page 69: 4. Click Ok.

    Okilan 6200e plus user’s guide novell netware 69 • the oki printing device has not been removed from the schema. See adding or removing the oki print server for more information. 4. Click ok. 5. Define filter and sort criteria for displaying a list of extended systems devices from which to choose. 6...

  • Page 70: 6. Select Assign.

    Okilan 6200e plus user’s guide novell netware 70 1. Install the network print server hardware and con- nect the cabling. Instructions for hardware installa- tion are found in your printer user's guide. 2. Create an okilan 6200e plus object. If you are unfamiliar with how to do this, see creating a n...

  • Page 71: Queue.

    Okilan 6200e plus user’s guide novell netware 71 note: to load balance print queue jobs, repeat steps 5 through 9 for another port. Create a new printer object for the network print server port and then select the same print queue object. This will allow multiple printers to service a single print q...

  • Page 72: Select The Help Button.

    Okilan 6200e plus user’s guide novell netware 72 1. From the nwadmin screen, select (double-click) the network print server you wish to configure. 2. Set the appropriate configuration by choosing the applicable detail pages. The following settings are configurable: for specific information about the...

  • Page 73: Okinet For Nds.

    Okilan 6200e plus user’s guide novell netware 73 the install utility on the installation diskette can also be used to remove the oki print server class. This utility removes the class from novell’s netware administra- tor and removes all the associated files that were cop- ied during the installatio...

  • Page 74: Need An Ip Address.

    Okilan 6200e plus user’s guide novell netware 74 requirements: • ip address on the file server • ip address on the print server (ipx/spx-only print servers will not work; you must use tcp/ip) • the client must also run the most current version of the netware client to get the ndps objects. Note: the...

  • Page 75: Through Nwadmin32

    Okilan 6200e plus user’s guide novell netware 75 5. Select the icon for the type of printer driver that you want to add under the resource types window. A complete list of currently loaded printer drivers of that type appears in the current resources win- dow. 6. To add a driver to the list, click a...

  • Page 76: Access Printers

    Okilan 6200e plus user’s guide novell netware 76 (nwadmin32). The file server console approach offers less flexibility in configuration. Both approaches are described in this and the following subsection. Setting up the network print server for public access printers 1. Create ndps manager. 2. Doubl...

  • Page 77: Through Nwadmin32

    Okilan 6200e plus user’s guide novell netware 77 12. Choose the printer drivers and click continue. 13. The status should show idle. Private access printers: these can only be created through nwadmin32 1. Create ndps manager in nwadmin32. 2. Go to the context in which the private printer is to resid...

  • Page 78: Console

    Okilan 6200e plus user’s guide novell netware 78 10. Ignore the error message, “the printer agent just created needs attention.” 11. Choose the printer drivers and click continue. Setting up the network print server for public access printers at the file server console 1. Create ndps manager in nwad...

  • Page 79: Introduction

    Okilan 6200e plus user’s guide tcp/ip 79 tcp/ip introduction tcp/ip overview this section contains instructions and information on how to configure your network print server. You will also be instructed on how to set up your host comput- ers to print to the network print server using the tcp/ ip pro...

  • Page 80: Network Preparation

    Okilan 6200e plus user’s guide tcp/ip 80 • rarp • bootp network preparation • you should be familiar with network administration as well as the physical setup and operation of your network. • advise users of possible disruption during installa- tion. • make sure the serial number and ethernet addres...

  • Page 81: Server

    Okilan 6200e plus user’s guide tcp/ip 81 • install okinet for tcp/ip. See the setup guide. Overview of tcp/ip configuration • assign an ip address for the network print server • configure the network print server network infor- mation • configure hosts for printing to the network print server • test...

  • Page 82

    Okilan 6200e plus user’s guide tcp/ip 82 its ip address after 2 minutes, it defaults to 192.0.0.192. (this ip address should be used only temporarily for configuration purposes.) to choose an ip address: 1. Select an ip address and hostname for the net- work print server. Example: 192.168.42.50 net-...

  • Page 83: Assigning The Ip Address

    Okilan 6200e plus user’s guide tcp/ip 83 • okinet for netware - this windows utility must be run from a novell netware client. See novell net- ware for specific information. Assigning the ip address there are eight different methods for assigning an ip address to the network print server: gleaning, ...

  • Page 84: Workstation 3.5.

    Okilan 6200e plus user’s guide tcp/ip 84 2. Start a continuous ping to the network print server. Ping ip_address> example: ping 192.168.42.24 on some systems, this may require an additional parameter. Some implementations of ping only send out one ping packet which could get lost in transit. Check y...

  • Page 85

    Okilan 6200e plus user’s guide tcp/ip 85 bootp, with a certain ip address always assigned to a certain device. Depending on the server, both meth- ods may be used at the same time. If the network print server does not find a dhcp server after two minutes, it will timeout and assume a default address...

  • Page 86: Rarp Or Bootp

    Okilan 6200e plus user’s guide tcp/ip 86 route add 192.0.0.192 ‘’ip address of the workstation’’ 0 note: the zero (0) placed at the end of the route add command shown above is optional. The static route method only works if the host from which you are telneting is on the same subnet as the network p...

  • Page 87: For Netware.

    Okilan 6200e plus user’s guide tcp/ip 87 ware address and ip address to a configuration file. See your network documentation for instructions or refer to application considerations. Note: an ip address received from a rarp or bootp server is not permanently programmed into the network print server. ...

  • Page 88: Tcp/ip Configuration and

    Okilan 6200e plus user’s guide tcp/ip 88 • verify the ip address, default gateway and subnet mask are set to the proper values on the network print server by printing a configuration sheet. This can be done using either the print configuration sheet button, through the okinet utilities, or via tel- ...

  • Page 89: Remote Print Queue Name

    Okilan 6200e plus user’s guide tcp/ip 89 tem or computer manual for information about config- uring remote network printing. If you are still unable to configure your computer system to print to the net- work print server, contact oki data customer support at 1-800-oki-data (1-800-654-3282). Configu...

  • Page 90

    Okilan 6200e plus user’s guide tcp/ip 90 queue names should end with the number 1, 2, 3 or 4. If a number is not specified, the network print server will use printer port 1. The network print server is designed to handle many different types of printers and print data. Typically you will select the ...

  • Page 91

    Okilan 6200e plus user’s guide tcp/ip 91 lf use the lf suffix at the end of the remote print queue name, before the port number. Example: queuelf2 in addition to the form feed described above, the net- work print server inserts a carriage return character into the print job immediately before each l...

  • Page 93: Log_File_Name

    Okilan 6200e plus user’s guide tcp/ip 93 log_file_name this is the path to a file where error information from the lpd will be logged. Example: if you are printing to an ascii printer that requires a car- riage return/line feed, you may need two separate print- cap entries: one entry for print jobs ...

  • Page 94: Application Considerations.)

    Okilan 6200e plus user’s guide tcp/ip 94 note: the remote lpd implementation of the net- work print server does not support any unix lpd input or output filters or the direct printing of ban- ner pages. It is possible to configure some unix systems so that banner pages and input and out- put filters...

  • Page 95: Send

    Okilan 6200e plus user’s guide tcp/ip 95 send treated the same as put. Mput print multiple files. Type changes the representation type used for data trans- fer. Image (or binary) and ascii are the only types supported. Ascii equivalent to “type ascii.” binary equivalent to “type binary.” image equiv...

  • Page 96: Quit

    Okilan 6200e plus user’s guide tcp/ip 96 quit terminates ftp session and exits ftp. Bye equivalent to quit. Okilan print servers allow one ftp connection. If more ftp connections are attempted, the network print server rejects the connection until one of the other ftp connections is closed. When an ...

  • Page 97: Timeout Checking

    Okilan 6200e plus user’s guide tcp/ip 97 (network_print_server_name:anyone): 230 user logged in. Ftp> binary 200 type set to i. Ftp> put chart.Ps mpx1 local: chart.Ps remote: mpx1 200 port command successful. 150 opening binary mode data connection for mpx1. 226 transfer complete. 4549 bytes sent in...

  • Page 98: Output Port: 1

    Okilan 6200e plus user’s guide tcp/ip 98 output port: 1 consult your system documentation for information on how to submit print jobs to a raw port. Okinet for tcp/ip okinet for tcp/ip overview this section contains information about okinet for tcp/ip. Okinet for tcp/ip provides snmp-based sup- port...

  • Page 99: System Requirements

    Okilan 6200e plus user’s guide tcp/ip 99 system requirements okinet for tcp/ip is a windows-based program which is compatible with windows 3.X, windows nt/2000 and windows 95/98/me. Okinet for tcp/ip requires that the tcp/ip protocol is running using a winsock (windows sockets) tcp/ip stack, version...

  • Page 100: Okinet For Tcp/ip

    Okilan 6200e plus user’s guide tcp/ip 100 by default, the all print servers view is selected and all print servers attached to the subnet of the network from which the okinet utility is running are listed. Configuring the network print server using okinet for tcp/ip the following steps outline how t...

  • Page 101: Configuring Tcp/ip Options

    Okilan 6200e plus user’s guide tcp/ip 101 configuring tcp/ip options to configure options specific to the tcp/ip protocol, select the tcp/ip tab. The following screen will dis- play: fill in the following information: tcp/ip output port netware snmp netware port protocols netware queues snmp traps e...

  • Page 102: Ip Address Resolution

    Okilan 6200e plus user’s guide tcp/ip 102 ip address resolution • set permanent - select this option to make the ip address permanent. If the network print server has been configured to remember its ip address, it does not need to determine its address each time it is powered on. Enter the ip addres...

  • Page 103: Server.

    Okilan 6200e plus user’s guide tcp/ip 103 caution: if you select an invalid subnet mask, you may not be able to access the network print server. Default gateway if your local network is attached to other networks, you can specify the address of your default gateway. This gateway will be selected whe...

  • Page 104: Options

    Okilan 6200e plus user’s guide tcp/ip 104 netware and netware port configuration options for specific information on netware or netware port options, see novell netware, or select the help button on the bottom right of the utility's screen. Netware queues configuration options the netware queues opt...

  • Page 105: Port Number

    Okilan 6200e plus user’s guide tcp/ip 105 port number select the port number you wish to configure. Name field enter a descriptive name to identify the port. Language switching each output port can be configured to perform the fol- lowing language switching options: off, pcl, post- script or automat...

  • Page 106: Printer Type

    Okilan 6200e plus user’s guide tcp/ip 106 • pcl - inserts the appropriate character string in front of each print job to switch the printer to the pcl print language. • postscript - inserts the appropriate character string in front of each print job to switch the printer to the postscript printer la...

  • Page 107: Postscript Switch Sequence

    Okilan 6200e plus user’s guide tcp/ip 107 postscript switch sequence enter the character string to switch the printer to the postscript print language. Configuration page language select the appropriate printer language for printing configuration pages on your printer. Output type select the appropr...

  • Page 108: System Name

    Okilan 6200e plus user’s guide tcp/ip 108 note: snmp options need to be configured only if you are managing an network print server or get- ting system information using snmp. Fill in the following information: system name enter the name of your choice. This name will identify the network print serv...

  • Page 109: Get Community Name

    Okilan 6200e plus user’s guide tcp/ip 109 get community name this field is used to set the community name required to get information from the print server. The default community name is public. Note: for jetadmin to function correctly with the network print server, the snmp get and set com- munity ...

  • Page 110: Enabling/disabling Protocols

    Okilan 6200e plus user’s guide tcp/ip 110 enabling/disabling protocols to enable or disable protocols on the network print server, select the protocols tab. Select each protocol you wish to enable. If you disable a protocol, the net- work print server will no longer communicate using that protocol. ...

  • Page 111: Protocol

    Okilan 6200e plus user’s guide tcp/ip 111 note: snmp options need to be configured only if you are managing an network print server or get- ting system information using snmp. Protocol select the protocol for which you wish to configure trap information. Trap destination • tcp/ip protocol - enter th...

  • Page 112: Saving The Configuration

    Okilan 6200e plus user’s guide tcp/ip 112 • off-line • no printer attached • paper out • paper jam • door open • toner low • printer error the toner low, door open and paper jam traps require that your printer be set to automatic emulation switch- ing (the default) or pcl emulation. Saving the confi...

  • Page 113: Bar, Select Reset.

    Okilan 6200e plus user’s guide tcp/ip 113 • statistics • technical support • system printing a configuration sheet the configuration sheet provides current network, print server and printer information. To print a configuration sheet, select the network print server from the list of available print ...

  • Page 114: Tcp/ip

    Okilan 6200e plus user’s guide tcp/ip 114 tcp/ip restores settings specific to the tcp/ip protocol con- figuration such as the ip address and subnet mask. Netware restores settings specific to the netware protocol configuration such as the mode and default file server. Ethertalk restores settings sp...

  • Page 115: Selecting An Existing View

    Okilan 6200e plus user’s guide tcp/ip 115 okinet has two predefined views. The all print serv- ers view displays all the print servers available on your local network. The unconfigured print servers view displays only the print servers on the local network that have not been configured. Creating a n...

  • Page 116: Sort

    Okilan 6200e plus user’s guide tcp/ip 116 sort the sort option displays the network print server list in a specific order. The list can also be sorted by click- ing on the column by which you wish to sort the list. A sort order can be defined on columns displayed on the main okinet for tcp/ip screen...

  • Page 117: Search Filter

    Okilan 6200e plus user’s guide tcp/ip 117 search filter the search option defines the criteria for identifying network print servers on the network. • search local network - this method broadcasts a discovery request to locate all network print servers on the local network. All network print servers...

  • Page 118: 3. Select Add.

    Okilan 6200e plus user’s guide tcp/ip 118 to define the location of a new column, select the loca- tion in the columns displayed field where you wish the new column to be inserted, then select add. If no loca- tion is selected, the new column is added to the end of the list and the column displaysto...

  • Page 119: Information

    Okilan 6200e plus user’s guide tcp/ip 119 permanently defining snmp access information access to network print server configuration and diagnostic information is determined by using commu- nity names. The special options window is used to permanently define access information so that it does not nee...

  • Page 120: Add

    Okilan 6200e plus user’s guide tcp/ip 120 add select the add button to define access to a new net- work print server or a group of print servers. The ip address must follow the format xxx.Xxx.Xxx.Xxx, where each xxx is a number from 0 to 255. Use * to specify groups/subnets. Example: to add a single...

  • Page 121: Starting The Bootp Server

    Okilan 6200e plus user’s guide tcp/ip 121 sion option from the tools menu. For more informa- tion about how to configure an network print server using telnet, see telnet configuration. Starting the bootp server oki has provided a stand-alone bootp server to help assign ip addresses to the network pr...

  • Page 122: Running A Telnet Session

    Okilan 6200e plus user’s guide tcp/ip 122 note: the configuration of your network print server is password protected. Only authorized users can alter the configuration. Running a telnet session 1. To run the configuration utility, type the following: telnet network_print_server_name> 2. Replace netw...

  • Page 123

    Okilan 6200e plus user’s guide tcp/ip 123 4. Specify subnet mask for your network 5. Identify default gateway ip address 6. Configure port 7. Tcp connection configuration 8. Download new firmware 9. Restore to factory defaults to select an option above, type its number and press enter. To quit, pres...

  • Page 124: Use This Option With Care!

    Okilan 6200e plus user’s guide tcp/ip 124 ***specify print server ip address (option 3) this option allows you to select the method the net- work print server uses to obtain its ip address or to set a permanent ip address. If the network print server has been configured to use a permanent ip address...

  • Page 125: Use This Option With Care!

    Okilan 6200e plus user’s guide tcp/ip 125 the default subnet mask is 0.0.0.0. The network print server interprets a subnet mask of 0.0.0.0 or 255.255.255.255 as no subnet mask specified. If you change the subnet mask, the change remains undetected until the network print server is reset or is powere...

  • Page 126

    Okilan 6200e plus user’s guide tcp/ip 126 this option enables you to select how the network print server configuration pages should be printed: text (default), pcl, postscript, or off. Configure language switching this option asks you to select the language of your printer. For a description of lang...

  • Page 127

    Okilan 6200e plus user’s guide tcp/ip 127 set the port number where the raw port connections will be accepted. Download new firmware (option 8) this option is provided for future product modifications and enhancements. It requires an update file from oki. Caution: do not use this option without havi...

  • Page 128: Troubleshooting

    Okilan 6200e plus user’s guide tcp/ip 128 the tcp/ip protocol to factory defaults. If you reset the network print server while a job is printing, the job may not print successfully. Troubleshooting main status indicator upon power-up, the main status indicator flashes orange. It changes to green whe...

  • Page 129: Unable to Assign Ip Address

    Okilan 6200e plus user’s guide tcp/ip 129 unable to assign ip address gleaning if you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • verify that the arp table contains the correct hard- ware and ip address by running the ‘arp -a’ co...

  • Page 130: Unix Bootp

    Okilan 6200e plus user’s guide tcp/ip 130 unix bootp if you are running unix, try the following methods with the bootp server (check the documentation for your particular unix flavor). • verify that the bootp server has reread the “/etc/ bootptab” file when the new entry was added. If the bootp serv...

  • Page 131: Static Route Entry

    Okilan 6200e plus user’s guide tcp/ip 131 static route entry if the network print server has printed a configuration page showing the default address, but it cannot be reached through telnet, check the following: • display the host’s routing tables with the ‘netstat -r’ command. Verify that the rout...

  • Page 132: Hardware Error Messages

    Okilan 6200e plus user’s guide tcp/ip 132 • if you are able to ping to the network print server, but are unable to telnet, the ip address is probably being shared with another device that does not support telnet. Okinet for tcp/ip—winsock errors • if you see an error before okinet for tcp/ip appears...

  • Page 133: System Crc Failed

    Okilan 6200e plus user’s guide tcp/ip 133 system crc failed the network print server has failed. • power cycle the network print server once. If the error continues, call oki data customer support at 1-800-oki-data (1-800-654-3282). Printing a configuration page if the status indicator turns solid o...

  • Page 134: Unable to Print

    Okilan 6200e plus user’s guide tcp/ip 134 unable to print lpr/lp • if the indicator blinks green, the network print server is receiving data. If nothing is actually print- ing, check the printer settings. For example, if you are using a postscript printer, verify the network print server is also set...

  • Page 135: Application Considerations

    Okilan 6200e plus user’s guide tcp/ip 135 • if you cannot connect over ftp but the ping suc- ceeds, try telneting to the network print server and print a configuration page to verify settings. If that fails, you might have a tcp/ip configuration prob- lem with the network print server. Application c...

  • Page 136: Support

    Okilan 6200e plus user’s guide tcp/ip 136 common unix printing system™ (cups™) support cups is becoming the standard printing method in unix, linux, and similar environments. Among its advantages are: • it uses the ipp standard. • it is web browser based. • it provides robust bi-directional printer ...

  • Page 137: Http://localhost:631/admin

    Okilan 6200e plus user’s guide tcp/ip 137 -v = ip address of the printer (creating an lpr port) -m = the printer’s ppd file name. This should only be done after the ppd file has been copied to the appropriate folder. 3. Launch the system’s web browser and enter the following path: http://localhost:6...

  • Page 138: Address With Bootp

    Okilan 6200e plus user’s guide tcp/ip 138 from the above screen, you can change ports by clicking modify printer. From the configure printer but- ton you can adjust printer settings such as paper trays, duplex option, and media settings. Assigning the network print server ip address with bootp bootp...

  • Page 139: Address Formats

    Okilan 6200e plus user’s guide tcp/ip 139 note: once the network print server has been assigned an ip address, the network print server configuration utility (which is run by accessing the network print server using telnet) or okinet for tcp/ip allows you to change and/or make the ip address permane...

  • Page 140

    Okilan 6200e plus user’s guide tcp/ip 140 the colons between each byte. The ip part of the entry is where the ip address is specified. There are several other parameters that can be specified in a bootptab entry. However, the three parameters shown here are the only ones required for network print s...

  • Page 141: Limitations

    Okilan 6200e plus user’s guide tcp/ip 141 attempted bootp request. Unfortunately, the ps options differ from one unix workstation to another. Perform a man ps at the unix prompt to consult a manual page on the ps command for a particular work- station. If bootpd is not running on a workstation, type...

  • Page 142: Address Formats

    Okilan 6200e plus user’s guide tcp/ip 142 do not know their ip address. When powering up on a network, a device that uses rarp broadcasts its net- work hardware address in a rarp request message. A rarp server (which may be a unix workstation) responds with an ip address. The device then knows its i...

  • Page 143

    Okilan 6200e plus user’s guide tcp/ip 143 daemon is called rarpd. A name can be assigned to any device on a network and is arbitrary. For the fol- lowing examples the name used for the network print server is okiprinter. Remember that this name is arbitrary; a customer can assign any name. 192.168.4...

  • Page 144: Limitations

    Okilan 6200e plus user’s guide tcp/ip 144 rarpd daemon finds the host name, okiprinter, listed as the name associated with the network hardware address. 4. The rarpd then consults the “/etc/hosts” file and looks up the name okiprinter. It finds an ip address (in this case 192.168.42.55) associated w...

  • Page 145: The Network Print Server

    Okilan 6200e plus user’s guide tcp/ip 145 2. The ip address assigned to the network print server and the ip address of the rarp server belong to the same subnet. Configuring hp-ux v8.07 for printing with the network print server this application note describes the configuration of the printing syste...

  • Page 146: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 146 prerequisites before you proceed, the following prerequisites must be met. Most of the time, steps 2 through 5 are already configured since the hp-ux system is on a tcp/ip network. Do not perform steps 2 through 5 unless the installation procedure fails! 1. ...

  • Page 147: Procedure

    Okilan 6200e plus user’s guide tcp/ip 147 procedure hp-ux uses an interactive utility called sam (system administration manager) to configure printing. To con- figure printing using sam, do the following: 1. Login to the hp-ux system as root. 2. Invoke the sam utility by typing sam at the unix promp...

  • Page 148: 7. Printer Name: — Lj4

    Okilan 6200e plus user’s guide tcp/ip 148 remote printer job removal. E remote status model - rsmodel used for remote printer queue status. F make this the system default printer? (y or n) - n g printer class - (optional) h restrict cancel - (optional) i remote printer on a bsd system? (y or n) - y ...

  • Page 149: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 149 • lj4 - the local queue name on the hp-ux system to which print jobs will be directed. The print jobs are destined for a printer attached to the network print server. • okiprinter - the host name of the remote sys- tem which is the network print server. For ...

  • Page 150: Man Inetd.Conf.

    Okilan 6200e plus user’s guide tcp/ip 150 this command. If rlp is running (that is, if you see output after executing this command), kill the pro- cess with the command: kill -15 process_number. 3. Make sure the following entry is in the “/etc/ inetd.Conf” file: printer stream tcp nowait root “/ usr...

  • Page 151: Printer Class - (Optional)

    Okilan 6200e plus user’s guide tcp/ip 151 4. Enter information into the following fields as described. A printer name - lj4 the name of the printer as referenced by the local hp machine. Print jobs sent to this printer are passed to the network print server. B remote system name - okiprinter the nam...

  • Page 152: The Network Print Server

    Okilan 6200e plus user’s guide tcp/ip 152 5. Select the ok button. A status window will outline the tasks performed to install the queue. When you see the message task completed, select ok. 6. Pull down the lists menu and select exit. 7. Select the exit sam button. 8. Test printing to the network pr...

  • Page 153: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 153 • yourqueuename - this is the name of the queue on the network print server and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queue name, the job will be converted accord...

  • Page 154: Prompt: /etc/inetd -C

    Okilan 6200e plus user’s guide tcp/ip 154 4. Make sure the following entry is in the “/etc/ser- vices” file: printer 515/tcp spooler 5. Start inetd by typing the following at the unix prompt: /etc/inetd -c procedure hp-ux uses an interactive utility called sam (system administration manager) to conf...

  • Page 155: Printer Class - (Optional)

    Okilan 6200e plus user’s guide tcp/ip 155 the name of the queue on the network print server and must end with 1, 2, 3 or 4, depend- ing on the port selected to service the print jobs. D remote cancel model - rcmodel used for remote printer job removal. E remote status model - rsmodel used for remote...

  • Page 156: Network Print Server

    Okilan 6200e plus user’s guide tcp/ip 156 configuring sco unix for printing with the network print server this application note describes the configuration of the printing system on the santa cruz operation’s (sco) version of the unix operating system. For clarity and brevity, the following specific...

  • Page 157: Procedure

    Okilan 6200e plus user’s guide tcp/ip 157 2. The name of the network print server (okiprinter) and the ip address you wish to assign are in the “/etc/hosts” file of the sco machine. 3. The ip address of the network print server has been assigned and you are able to telnet to okiprinter successfully....

  • Page 158: Lj4.

    Okilan 6200e plus user’s guide tcp/ip 158 6. Using a text editor (such as vi), add the following entry to the “/etc/printcap” file” lj4:\ :lp=:rm=okiprinter:rp=pcl2:\ :sd=/usr/spool/lpd/ lj4:\ :lf=/usr/spool/lpd/lj4/lj4.Log: 7. At the unix prompt, type: mkdir /usr/spool/lpd/ lj4. 8. Type: touch/usr/...

  • Page 159: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 159 • yourqueuename - this is the name of the queue on the network print server and must end with 1 or 2, depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queue name, the job will be converted accord- ingl...

  • Page 160: Queuename

    Okilan 6200e plus user’s guide tcp/ip 160 b designation host for remote jobs - okiprinter this is the name of the network print server. This host name must also be con- tained in the “/etc/hosts” file. C name of queue on remote printer - your- queuename d name of device to add - “any arbitrary name”...

  • Page 161: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 161 • lj4 - the local queue name on the solaris system to which print jobs that are destined for a printer attached to the network print server will be directed. • okiprinter - the host name of the remote sys- tem which is the network print server. For exam- ple...

  • Page 162: Name - I Any.

    Okilan 6200e plus user’s guide tcp/ip 162 1. Login to the solaris machine as root. 2. Type: lpsystem -t bsd okiprinter. 3. Type: lpadmin -p lj4 -s okiprinter!Yourqueue- name - i any. 4. Type: accept lj4. 5. Type: enable lj4. 6. Try printing by issuing the following command: lp - d lj4 filename confi...

  • Page 163: Prerequisites

    Okilan 6200e plus user’s guide tcp/ip 163 • yourqueuename - this is the name of the queue on the network print server and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queue name, the job will be converted accord...

  • Page 164: Procedure

    Okilan 6200e plus user’s guide tcp/ip 164 procedure to configure the sun-os or ultrix machine so that users can spool print jobs to the pcl print queue on the network print server named okiprinter, do the fol- lowing: 1. Login to the sun-os or ultrix machine as root. 2. Using a text editor (such as ...

  • Page 165

    Okilan 6200e plus user’s guide tcp/ip 165 with the network print server, there is no configura- tion required. Enter the print server ipp url as http:// xxx.Xxx.Xxx.Xxx:631/ipp/portn, where xxx.Xxx.Xxx.Xxx is the ip address of the print server and portn is the output port number. Example: http://198...

  • Page 166: Introduction

    Okilan 6200e plus user’s guide lan manager/lan server 166 lan manager/lan server introduction lan manager/lan server overview this section contains information about the okinet for os/2 utility. This utility allows you to install and config- ure the network print server for your specific environ- me...

  • Page 167: Client Nodes

    Okilan 6200e plus user’s guide lan manager/lan server 167 client nodes a printer connected to the network can be accessed from dos and other network nodes properly config- ured as lan manager/lan server client nodes. You should be familiar with the os/2 print manage- ment utilities. See your os/2 ma...

  • Page 168: Network Preparation

    Okilan 6200e plus user’s guide lan manager/lan server 168 3. Associate a print queue with the new local printer port. Once the installation is complete, you can verify com- munication by printing a configuration sheet. Network preparation • you must have network administrator privileges to install t...

  • Page 169: Up These Files.

    Okilan 6200e plus user’s guide lan manager/lan server 169 depending on your current configuration, the following software may also be needed: • printer driver installation diskettes. These diskettes are provided with the os/2 operating system or are available from the printer manufacturer. • lan man...

  • Page 170: Running Install

    Okilan 6200e plus user’s guide lan manager/lan server 170 note: the directory where oki dll files install, c:\os2\dll, must be the first entry in the libpath command located in the config.Sys file. When you reboot the system, the os/2 spooler will load the oki network printer redirector. Running ins...

  • Page 171: Running Okinet For Os/2

    Okilan 6200e plus user’s guide lan manager/lan server 171 2. Verify /os2/dll is first in the libpath statement in the config.Sys file. 3. Shut down and restart the os/2 file server. 4. Run the okinet for os/2 utility to add local ports. Running okinet for os/2 before you can print via the network pr...

  • Page 172: Creating An Os/2 Printer

    Okilan 6200e plus user’s guide lan manager/lan server 172 printout.) the port is indicated by p1, p2, p3, or p4. Use the arrow buttons to scroll through the available print servers on the network. 5. Enter a local port name. Highlight the entry field labeled local port name, and enter a name that wi...

  • Page 173: Os/2 2.X and Os/2 Warp

    Okilan 6200e plus user’s guide lan manager/lan server 173 5. Configure the printer as you would configure a directly-attached printer. Set the device field to the local port name you created in okinet for os/2. Use the print manager to attach queues to the printer you just created. Refer to your os/...

  • Page 174: Printing Overview

    Okilan 6200e plus user’s guide lan manager/lan server 174 note: in order for the configuration sheet to print correctly, the network print server must determine if the connected printer is a text, pcl, or post- script printer. The default is text. If the connected printer is a postscript-only printe...

  • Page 175: Os/2 2.X and Os/2 Warp

    Okilan 6200e plus user’s guide lan manager/lan server 175 4. Change the default print queue to the print queue associated with the network print server. Os/2 presentation manager applications which use the default printer now print to the network print server printer. Os/2 2.X and os/2 warp to speci...

  • Page 176: Additional Utility Features

    Okilan 6200e plus user’s guide lan manager/lan server 176 example: if the network print server is installed on a server named server 1 and assigned the queue name mpx- lpt, the following command issued from an os/2 com- mand prompt would reassign lpt1: c>net use lpt1 \\server1\mpxlpt if os/2 does no...

  • Page 177: Port.

    Okilan 6200e plus user’s guide lan manager/lan server 177 4. From the configure menu, select delete local port. 5. From the delete local port screen, use the scroll arrows to select and highlight the local port you wish to delete. 6. Select delete. The cancel button exits the screen without deleting...

  • Page 178: Configuring Parallel Port P1

    Okilan 6200e plus user’s guide lan manager/lan server 178 the network print server resets when you select ok to save any of the options, except the print configura- tion sheet option. Configuring parallel port p1 ports p1 must be configured based on the printer you intend to use. 1. From the configu...

  • Page 179: Restoring Factory Defaults

    Okilan 6200e plus user’s guide lan manager/lan server 179 • configuration page print language - the factory default is text. If your network print server is attached to a postscript or pcl printer, enable the appropriate selection. The network print server configuration sheet prints in the language ...

  • Page 180: Uration Sheet In Postscript.

    Okilan 6200e plus user’s guide lan manager/lan server 180 printer is a postscript-only printer, you must con- figure the network print server to print the config- uration sheet in postscript. The configuration sheet prints automatically if the net- work print server fails due to a network protocol e...

  • Page 181: Troubleshooting

    Okilan 6200e plus user’s guide lan manager/lan server 181 troubleshooting no configuration sheet if the led turns solid orange due to a network protocol error and no configuration sheet is printed, your printer may be configured for postscript operation. If so, you must re-configure your printer for...

  • Page 182: Introduction

    Okilan 6200e plus user’s guide printing using mac os x (10.1x or higher) 182 printing using mac os x (10.1x or higher) introduction in mac os x the chooser has been replaced with print center. Print center is used to install and set up all printers that are to be used under os x. Setting up the netw...

  • Page 183: Appletalk Printers

    Okilan 6200e plus user’s guide printing using mac os x (10.1x or higher) 183 once in print center there are three ways to set up a printer: appletalk, lpr printers using ip, and usb. Only the first two are discussed here. Appletalk printers 1. Select appletalk from the selection type. 2. All appleta...

  • Page 184: 5. Click Add.

    Okilan 6200e plus user’s guide printing using mac os x (10.1x or higher) 184 4. Select the appropriate ppd file for your printer 5. Click add. Lpr printers using ip 1. Select lpr printers using ip from the selection type. 2. A new window appears asking for the printer infor- mation. 3. Enter the pri...

  • Page 185: Introduction

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 185 ethertalk support for apple macintosh introduction ethertalk support for apple ® macintosh: ® overview this section describes the steps necessary to config- ure the ethertalk protocol. The following topics are covered in this s...

  • Page 186: Before You Start

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 186 before you start 1. Install the network print server hardware if neces- sary and connect the cabling. Instructions for hard- ware installation are found in your printer user's guide. 2. Write down the serial number and ethernet...

  • Page 187

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 187 running the network print server utility 1. Turn on your printer and check that it is on-line. 2. Verify that the network print server status led is solid green. 3. Copy the cd-rom folder labeled okinet utilities for ethertalk ...

  • Page 188: Dow.

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 188 3. Enter a name for the network print server. If you choose a name that is already being used, the net- work print server appends a number to the end of the name. Names can be a maximum of 32 charac- ters long. 4. Click rename....

  • Page 189: Status

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 189 status the status option is accessed by selecting status from the file pull-down menu. This option displays the status and ethertalk configuration of the selected printer. Advanced configuration options the following configurat...

  • Page 190: Enable Port

    Okilan 6200e plus user’s guide ethertalk support for apple macintosh 190 enable port this option allows you to enable or disable a port. If a port is disabled, it appears in the network print server utility but does not appear in the chooser. A disabled port cannot be configured. The only valid opti...

  • Page 191: Before You Call

    Okilan 6200e plus user’s guide troubleshooting 191 troubleshooting before you call this section allows you to troubleshoot problems you may have installing or using the ethertalk protocol. After trying these suggestions, if you are still having difficulty, call oki data customer support at 1-800- ok...

  • Page 192

    Okilan 6200e plus user’s guide troubleshooting 192 • verify that the appletalk type is laserwriter. • verify that the network print server has passed self-test. The status indicator should be solid green. • check the connections between the network print server and the macintosh. When the network pr...

  • Page 193: Is Not Pcl.

    Okilan 6200e plus user’s guide troubleshooting 193 • print an network print server configuration sheet to verify language switch settings. Verify the setting is not pcl. • verify the printer’s language setting is not pcl. Unable to print a document if a document will not print, first check your prin...

  • Page 194: Network Error Messages

    Okilan 6200e plus user’s guide troubleshooting 194 • verify that the printer is on-line and ready. • verify that the network print server is configured correctly. • if you suspect any of the cables are bad, swap them with cables you know are working. Network error messages network range exceeded dur...

  • Page 195: Message: Nbp Lookup Error.

    Okilan 6200e plus user’s guide troubleshooting 195 network print server utility errors message: appletalk network is inaccessible. Recommended action: examine network connec- tions and verify appletalk is active in the chooser. Message: device limit exceeded. First 100 devices will be shown. Recomme...

  • Page 196

    Okilan 6200e plus user’s guide troubleshooting 196 recommended action: the device did not respond. If a reset has just taken place, the network print server may not be registered on the network yet. Ver- ify the network print server is powered on. Search the network again to find the device. Message...

  • Page 197: Selecting Your Printer

    Okilan 6200e plus user’s guide troubleshooting 197 message: there is not enough memory to perform the requested action. Recommended action: closing windows or quitting application programs on the macintosh can make more memory available. Message: this option is not valid while the port is dis- abled...

  • Page 198: Zones

    Okilan 6200e plus user’s guide troubleshooting 198 zones if your appletalk network is linked to other networks, zones will appear in the chooser. Zones are a group- ing of different networks. They can be grouped by physical location. For example, zone 1 may contain all the printers on the network gr...

  • Page 199: Capturing With A Spooler

    Okilan 6200e plus user’s guide troubleshooting 199 capturing with a spooler spooling overview to use the network print server with the appleshare print server, follow these steps to capture the network print server. Capturing without bypass capturing 1. Use the network print server utility and do th...

  • Page 200: Capturing With Bypass

    Okilan 6200e plus user’s guide troubleshooting 200 • type 1 : laserwriter • type 2 : (none) capturing with bypass capture or release without using the network print server utility..

  • Page 201: Windows Nt 4.0/2000/xp

    Okilan 6200e plus user’s guide windows printing 201 windows printing network print server setup for windows nt 4.0/2000/xp windows nt/2000/xp overview this section contains instruction and information on how to set up your network print server for a windows nt 4.0/2000/xp environment. Print options ...

  • Page 202: Okinet Connect For Ip

    Okilan 6200e plus user’s guide windows printing 202 okinet connect for ip okinet connect for tcp/ip is a full featured utility that allows simple, direct, tcp/ip printing from your com- puter to a printer attached to an oki tcp/ip enabled print server. Okinet connect has advantages over other tcp/ip...

  • Page 203: Add and Click New Port.

    Okilan 6200e plus user’s guide windows printing 203 5. From the list of available printer ports, select oki okinet connect ip monitor as the type of port to add and click new port..

  • Page 204: Address Changes.

    Okilan 6200e plus user’s guide windows printing 204 6. This opens the add network print server connect port screen, which lists all print servers available on the local subnet. 7. If the port you wish to add is listed in the ports available on local subnet: window, select the port name and click add...

  • Page 205: Okinet Connect For Dlc

    Okilan 6200e plus user’s guide windows printing 205 okinet connect for dlc okinet connect for data-link control (dlc) provides a direct printing solution for users in microsoft win- dows nt serverless environments with the dlc/llc protocol. Print jobs printed through okinet connect are sent directly...

  • Page 206: Monitor

    Okilan 6200e plus user’s guide windows printing 206 using the windows nt 4.0 lpr print monitor a microsoft lpr print monitor is shipped with windows nt 4.0. This print monitor is not included in the default windows nt installation; therefore, it needs to be installed. In order to set up an lpr print...

  • Page 207: Ip, See Okinet For Tcp/ip.

    Okilan 6200e plus user’s guide windows printing 207 3. Select add, then microsoft tcp/ip printing. 4. Click the close button. 5. Restart the system. Assign print server ip address using okinet for ip, assign the print server an ip address; for example, 10.10.10.2. Note: for more information on using...

  • Page 208: P2, Etc. Click Ok.

    Okilan 6200e plus user’s guide windows printing 208 5. In the name or address of server providing lpd: field, enter the ip address you assigned to the printer. 6. In the name of printer or print queue on that server: field, enter the print server output port being used. For example, for port 1 enter...

  • Page 209: Windows 95/98/me/xp

    Okilan 6200e plus user’s guide windows printing 209 9. Select a printer driver and click next. 10. Enter a name for the printer and click next. 11. To share the printers with others on the network, select shared and enter a share name for the printer. Network print server setup for windows 95/98/me/...

  • Page 210: System Requirements

    Okilan 6200e plus user’s guide windows printing 210 system requirements to use okinet connect for tcp/ip, your operating sys- tem must be windows 95/98/me and your computer must be configured to run tcp/ip. The print server must also be configured to run tcp/ip. Installation to install okinet connec...

  • Page 211: 8. Click Ok.

    Okilan 6200e plus user’s guide windows printing 211 6. Click ok. This opens the add network print server connect port screen, which displays a list of all okilan print servers available on the local subnet. 7. If the port you wish to add is listed in the ports available on local subnet window, selec...

  • Page 212: Port Settings

    Okilan 6200e plus user’s guide windows printing 212 you can now use okinet connect for tcp/ip. When- ever you print to the printer configured with okinet connect, your print job goes directly to the print server port. Port settings if you have printing problems while using the okinet connect printin...

  • Page 213: Ties From The File Menu.

    Okilan 6200e plus user’s guide windows printing 213 3. Select the printer driver from which you would like to print with okinet connect, then select proper- ties from the file menu. 4. Add an okinet connect port. This may be done by selecting add port under the details tab. 5. In the add port window...

  • Page 214: Port Number

    Okilan 6200e plus user’s guide windows printing 214 port number select the port number you wish to configure. Configuration page language select the appropriate printer language for printing and configuration pages on your printer. Enabling/disabling to enable or disable protocols on the network pri...

  • Page 215

    Okilan 6200e plus user’s guide regulatory information 215 regulatory information federal communications commission radio frequency interference statement this equipment generates and uses radio frequency energy. If not installed and used according to the man- ufacturer’s instructions, this equipment...

  • Page 216

    Okilan 6200e plus user’s guide regulatory information 216 • consult your dealer or an experienced radio/tv technician for additional advice. Oki is not responsible for radio/tv interference caused by using unauthorized cables or by making unauthorized changes to this equipment. Every effort has been...

  • Page 217

    Okilan 6200e plus user’s guide regulatory information 217.

  • Page 218

    Okilan 6200e plus user’s guide index 218 index a active directory 201 adding or removing oki print server class 72 advanced configuration options 189 okilan 6200e utility (ethertalk) 189 advanced management features 13, 16, 31, 34 okinet for nds 30 okinet for tcp/ip 30 printer security for tcp/ip pr...

  • Page 219

    Okilan 6200e plus user’s guide index 219 c choosing a tcp/ip address 81 client nodes 166 configuration jetadmin 32 okinet for nds 71 okinet for netware 46 tcp/ip 81, 100 tcp/ip network printing 89 telnet 121 web 121 web jetadmin 34 configuration sheet 58, 133, 188 printing 58, 133, 188 ethertalk 188...

  • Page 220

    Okilan 6200e plus user’s guide index 220 diagnostics 57, 112 dlc/802.2 protocol stack 166 e enabling/disabling protocols 57 okinet for netware 57 okinet for tcp/ip 110 error messages 132, 195 ethertalk 195 tcp/ip hardware 132 ethertalk 185 okilan 6200e utility 186 advanced configuration options 189 ...

  • Page 221

    Okilan 6200e plus user’s guide index 221 ascii 94 binary 94 bye 94 close 94 image 94 mode 94 mput 94 open 94 put 94 quit 94 send 94 stru 94 type 94 ftp troubleshooting 128, 129, 132, 133, 134 g get community name (tcp/ip) 107 gleaning (assigning an ip address) 83 h hp jetadmin 31 hp web jetadmin 34 ...

  • Page 222

    Okilan 6200e plus user’s guide index 222 imanager 41 install (lan manager/lan server) 169, 170 installation 169 running the utility 170 internet printing protocol 164 ip address 81 assigning 83 bootp 83 dhcp 83 gleaning 83 rarp 83 static route entry 83 choosing 81 serting by bootp 86 serting byrarp ...

  • Page 223

    Okilan 6200e plus user’s guide index 223 language switching 50, 105 language switching (netware) 49 line printer redirect/line printer daemon 88 load balancing 104 load balancing 30, 48 lpd 93 lpd (remote line printer daemon) 79 lpr os x 184 lpr/lpd (line printer redirect/line printer daemon) 88 m m...

  • Page 224

    Okilan 6200e plus user’s guide index 224 okilan 6200e utility (ethertalk) 186 advanced configuration options 189 enable port option 189 error messages 195 finding the okilan 6200e 187 renaming the okilan 6200e printer 187 reset board option 189 restore defaults 189 running 187 selecting a zone 188 s...

  • Page 225

    Okilan 6200e plus user’s guide index 225 port configuration options 49 resetting the okilan 6200e 58 restoring factory default settings 58 running the utility 45 searching for a specific okilan 6200e 59 snmp access information 63 view settings (modifying) 60 okinet for os/2 166 configuring a print s...

  • Page 226

    Okilan 6200e plus user’s guide index 226 print server class (adding or removing in okinet for nds) 72 printer menu 24 printer traps in tcp/ip 110 printing in the os/2 environment 174, 175 okilan 6200e connect for tcp/ip 202, 203, 204, 205, 209, 210, 211, 212, 213 private mib 13 pserver 43, 47 pserve...

  • Page 227

    Okilan 6200e plus user’s guide index 227 s sco unix application 156 prerequisites 156 procedure 156 security port 17 snmp 15 security in snmp 15 selecting a zone in ethertalk 188 selecting your printer in ethertalk 197 set community name in tcp/ip 107 simple network management protocol 13 snmp 13, 5...

  • Page 228

    Okilan 6200e plus user’s guide index 228 trap community name in tcp/ip 107 trap destination in tcp/ip 110 traps 29, 54, 109 snmp 14 traps (snmp) 14 troubleshooting 191 ethertalk 191 macintosh chooser 191 network error messages 194 okilan 6200e utility 195 unable to print 193 lan manager/lan server 1...

  • Page 229

    Okilan 6200e plus user’s guide index 229 v verifying access to the okilan 6200e 87 view settings (modifying) 60 in netware 60 in okinet for tcp/ip 115 w web admin configuration 21 web configuration 16 admin configuration 18 connecting to the okilan 6200e 17 for tcp/ip 121 okilan 6200e server discove...

  • Page 230

    Okilan 6200e plus user’s guide index 230 z zone (selecting in ethertalk) 188.