Oki es7120 Reference Manual - page 111
Troubleshooting > 111
Net Comm Error
Error Message used to report Network Interface
Communication Failure.
Net: Error
Used for display of Network Interface error code
(Net1: Error yy)
NVRAM Failure
NVRAM failure message.
Offset Tray
Optional face-down output tray (offset-capable)
Offset Tray Fail
Error message displayed for Offset Tray Unit
Failure.
Offset Tray Full
Error message displayed when optional output bin
is full.
Offset Tray Jam
Paper jam detected. Error message displayed for
Offset Tray jam.
Out of Memory
Error displayed when there is insufficient memory
to print a page or job.
Output Tray Full
Error message displayed when output tray is full.
Panel Locked
Message “flashed” when user requests panel
function that has been disabled.
Paper Low Tray 1
Tray 1 is low on paper.
Paper Low Tray 2
Tray 2 is low on paper.
Paper Low Tray 3
Tray 3 is low on paper.
Paper Low Tray 4
Tray 4 is low on paper.
Paper Out Tray 1
Tray 1 has no paper.
Paper Out Tray 2
Tray 2 has no paper.
Paper Out Tray 3
Tray 3 has no paper.
Paper Out Tray 4
Tray 4 has no paper.
Paper Size Error
Incorrect setting of paper size has caused an error.
Refer to
.
PDF Format Error
PDF File format later than V1.6 is not supported.
Check the version of the PDF file.
Power Save
Displayed when printer is idle for a longer period of
time than the Power Save timer is set for.
Press ON LINE
Prompts the user to press the ON LINE button.
Processing
Printer is actively processing job data.
Receive
Status display for file status “Receive xx” (where xx
is percentage received).
Remove Paper
A help message to remove paper.
Replace EP Cart
A help message to replace the Drum/Toner
cartridge.
ROS Failure
Error message displayed for ROS failure. The laser
scanner unit is not functioning. Call service.
SELECT to Format
User prompt displayed when unformatted disk
detected.
MESSAGE
CONDITION/REASON/ACTION