Oki es7120 Reference Manual - page 42
Menu settings > 42
Factory Default
Execute
Execute
Restores factory
defaults for Network
interface options.
DNS
Enable
Disable
Disable
Enable/Disable
protocol.
WINS
Enable
Disable
Enable
Enable/Disable
protocol.
Web
Enable
Disable
Enable
Enable/Disable the
web page.
SNMP
Disable
SNMP v1/v2
SNMP v1/v2/v3
SNMP v3
SNMP v1/v2
Disable or configure
the required SNMP
protocol.
FTP Print
Enable
Disable
Disable
Allows you to print
through the printer’s
FTP server.
Hub Link Setting
Auto Negotiate
10 Base-T Full
10 Base-T Half
100 Base-T Full
100 Base-T Half
1000 Base-T Full
1000 Base-T Half
Auto Negotiate
To connect to a
network hub. When
Auto Negotiate is
selected, connection
to the Hub is
automatic. If
anyother setting is
selected, connection
to the Hub is only
through the selected
setting.
PS Protocol
Raw
ASCII
ASCII
When set to ASCII,
the printer will search
for embedded control
codes in the
PostScript data
stream.
When set to RAW, all
data will be handled
by the PS interpreter.
HTTP Port
1 - 9999
80
Selects the network
port to be used for
HTTP communication
with the printer’s
embedded web
pages.
Netware Frame
Auto-Sense
802.3
Ethernet II
802.2 SNAP
802.2
Auto-Sense
Select the Frame
Type that is suitable
to support the
Netware protocol.
PARAMETERS
VALUE
DEFAULT
DESCRIPTION