Oki es7120 Reference Manual - page 13
Basic operations > 13
P
OWER
SAVE
MODE
This printer is equipped with a Power Save mode to reduce power consumption when it is
left idle. The default idle time from last print activity until the printer enters Power Save
mode is 5 minutes. This time can be adjusted by the operator to any of the following: 5,
15, 30, 60 or 120 minutes.
When no print data is received within 5 minutes (default) since the last page is printed, the
printer will enter Power Save mode. An informative message is displayed on the control
panel indicating Power Save Mode. Consumption of power during Power Save mode is 10
Watts or less, and the time required to exit from Power Save mode to a print-ready status
is about 10 seconds.
E
XITING
THE
POWER
SAVE
MODE
The printer automatically exits from Power Save mode once it receives data from the
computer or if any key on the control panel is pressed.
C
ANCELLING
/
CHECKING
PRINTING
C
ANCELLING
PRINTING
To cancel printing, you can either cancel the print job at this printer or at the computer.
Cancelling a print job at the printer
Press the CANCEL
button then press the ON LINE button on the control panel. However,
pages being printed at the moment will continue to be printed.
Cancelling print jobs at the computer
Double-click the printer icon
at the bottom right of the taskbar in Windows.
From the displayed window, right click the document name that you wish to delete and click
the DELETE key.
C
HECKING
STATUS
OF
DATA
Checking in Windows
Double-click the printer icon
on the task bar at the bottom right of the screen.
From the displayed window, check the column, Status.