Oki GL408e Install Manual - page 11
Manual is about: GL408e/GL412e WLAN Card Install Guide
of
13
11
1)
Mounting the printer above the rewinder (cont’d)
If the front cover snaps into place correctly,
you can proceed to further tighten the screws
permanently, followed by inserting the
thumbscrew used to secure the printer’s front
cover in the first step of this guide.
Finally, connect the printer power cable as
shown, routing it through the slot at the
bottom of the internal rewinder.
Figure 2h. Plugging the
power cable
Figure 2g. Installing the
thumbscrew