For printer models: cutter installation guide gl 4xx e series for printer models: read this installation guide before and during the installation of the above accessory. Keep this installation guide handy for future reference..
2 simple-cutter installation guide 1 general 1.1 important information this quick guide provides important information on how to setup your new sato product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the immedia...
3 simple-cutter installation guide 1.3 explanation of symbols this instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. Warning! Indicates neglectful or erroneous use may cause irreparable damage to the product,...
4 simple-cutter installation guide 1.4 contact and document information . Extensive contact information of worldwide sato operations can be found on the internet at www.Satoworldwide.Com version: si-gl4xxe-01ra-05-06-07-cutig © copyright 1994 – 2007 all rights reserved. No part of this document may ...
5 simple-cutter installation guide gl4xxe label cutter installation 1 5 3 4 3 2 the label cutter is housed in a cover assembly that is designed to replace the factory-installed front cover of the gl4xxe series printer. Follow the procedures below to install the label cutter. 1. Make sure the printer...
6 simple-cutter installation guide dispenser setup via the lcd menu 1. Turn the printer on and wait for it to initialize and go into online mode. 2. Press the line button to go to offline mode. 3. Press the function button to display the different menu icons 4. Select the advanced mode menu and pres...
7 simple-cutter installation guide.
