Oki GL408e Install Manual - page 6
6
Simple-Cutter Installation Guide
Dispenser setup via the LCD Menu
1. Turn the printer ON and wait for it to initialize and go into
ONLINE mode.
2. Press
the
Line Button to go to OFFLINE mode.
3. Press
the
Function Button to display the different menu icons
4. Select the Advanced Mode Menu and press the Enter Button.
5. Scroll to the Media Handling menu using the cursor buttons.
6. Once the cutter has been installed correctly, this menu allows you
to select the Cutter option to activate the cutter’s functionality.
7. When completed, go back to ONLINE mode after saving the new
settings.
Once the Label Cutter has been installed, the printer automatically detects it.
The cutter is not activated by default, except via the printer driver or via SBPL
software commands.
PRINTER CONFIGURATION FOR CUTTER OPERATION
OFFLINE
ADVANCED MODE
Figure 2.
Setting
the Cutter
option