Oki GL408e Manual

Manual is about: GL408e/GL412e WLAN Card Install Guide

Summary of GL408e

  • Page 1

    Read this installation guide before and during the installation of the above accessory. Keep this installation guide handy for future reference. Real-time-clock installation guide for printer models: gl 4xx e series.

  • Page 2: 1   General

    2 real-time clock installation guide 1 general 1.1 important information this quick guide provides important information on how to set up your new sato product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the imme...

  • Page 3

    3 real-time clock installation guide 1.3 explanation of symbols this instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. Warning! Indicates neglectful or erroneous use may cause irreparable damage to the produc...

  • Page 4

    4 real-time clock installation guide 1.4 contact and document information . Extensive contact information of worldwide sato operations can be found on the internet at www.Satoworldwide.Com version: si-gl4xxe-01ra-06-06-07-rtcig © copyright 1994 – 2007 all rights reserved. No part of this document ma...

  • Page 5

    5 real-time clock installation guide figure 1. Removing the left-side cover of the printer gl4xxe real-time clock installation before installing the real-time clock chip, make sure the printer is off and disconnected from the power supply. Make sure you have discharged any static electricity (by tou...

  • Page 6

    6 real-time clock installation guide gl4xxe real-time-clock installation 4. Insert the chip labelled (3) into the socket, making sure that pin 1 of the chip is aligned to pin 1 of the socket. Mount it into place firmly. 5. Reinstall the left-side cover and reconnect the interface card, power and sig...

  • Page 7

    7 real-time clock installation guide clock configuration via the lcd menu 1. Turn the printer on and wait for it to initialize and go into online mode. 2. Press the line button to go to offline mode 3. Press the function button to display the different menu icons 4. Select the advanced mode menu and...

  • Page 8

    8 real-time clock installation guide.