Oki ML6300FB-SC User Manual - page 30
Operating instructions > 30
Page Length (Continuous)
Select the length of a
continuous form.
3.5 in, 4 in, 5.5 in, 6 in, 7 in,
8 in, 8.5 in, 11 in, 11 2/3 in,
12 in, 14 in, 17 in, 5 in, 3 in,
3.25 in
TOF (Continuous)
Select the reference position
for the TOF position when
auto loading continuous form
paper from the rear of the
printer. (Up to the mid-
section of characters in the
first line.)
“1Chr. Set Pos.” is printed if
the TOF position is set by
using SHIFT + PARK
switches.
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in) 12.7 mm
(1/2 in)
14.82 mm (7/12 in) 16.93
mm (2/3 in) 19.05 mm (3/4
in) 21.17 mm (5/6 in) 23.28
mm (11/12 in) 25.4 mm (1
in)
27.52 mm (13/12 in) 1Chr.
Set Pos.
Initial Position
This is the position of the
paper when the paper is
already loaded at power on.
(For continuous form mode
only.)
Tear OFF
Auto Eject Position
Select a printable area at the
bottom of cut sheets of paper
in cut-paper mode (the
character centre position).
6.35 mm (1/4 in)
14.8 mm
Page Length (Cut Sheet)
Select the page length of cut-
paper.
3.5 in, 4 in, 5.5 in, 6 in, 7 in,
8 in, 8.5 in, 11 in, 11 2/3 in,
12 in, 14 in, 16.57 in, 5 in, 3
in, 3.25 in
TOF (Cut Sheet)
Select the reference position
for the TOF position when
feeding cut-paper in manual
mode. (Up to the mid-section
of characters in the first line.)
“1Chr. Set Pos.” is printed if
the TOF position is set by
using SHIFT + PARK
switches.
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in) 16.93
mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in) 25.4
mm (1 in)
27.52 mm (13/12 in) 1Chr.
Set Pos.
Wait Time
Select the waiting time
between setting paper on the
tray and feeding it while the
printer is waiting for paper to
be fed in cut-paper manual
feed mode.
500 ms
1 sec
2 sec
FF Function
Set feeding operation upon
receiving an FF code after
cut-paper is fed.
Eject
Form Feed
I-Prime
Select whether to print or
clear buffer contents upon
initialisation by receiving I-
PRIME.
Invalid
Buffer Clear
Buffer Print
Auto Feed XT
*EPSON only
Set the validity of an Auto
Feed XT signal.
Valid
Invalid
ITEM
FUNCTION
SETTING