Oki ML6300FB-SC User Manual - page 32
Operating instructions > 32
TOF Adjustment
(Cut Sheet)
Select an adjustment value
for the reference position in
regard to the TOF position of
cut-paper/passbooks.
The position moves to the
rear of the form by [+] and
to the top of the form by [-]
in 1/60 in increments.
-7 – -1
0
+7 – +1
Rear Load Adjustment
Select an adjustment value
for the reference position in
regard to the TOF position of
a continuous form.
The position moves to the
rear of the form by [+] and
to the top of the form by [-]
in 1/60 in increments.
-7 – -1
0
+7 – +1
Cut Position Adjust
Select an adjustment value
for the position to cut the end
of a continuous form. (In 1/
90 in increments)
-7 – -1
0
+7 – +1
Registration Low
Adjust the print starting
position on printing in the
reverse direction. (The
position moves to the right or
left in 1/720 in increments.)
-10 – -1
0
+10 – +1
Registration Normal
Adjust the print starting
position on printing in the
reverse direction. (The
position moves to the right or
left in 1/720 in increments.)
-10 – -1
0
+10 – +1
Registration High1
Adjust the print starting
position on printing in the
reverse direction. (The
position moves to the right or
left in 1/720 in increments.)
-10 – -1
0
+10 – +1
Registration High2
Adjust the print starting
position on printing in the
reverse direction. (The
position moves to the right or
left in 1/720 in increments.)
-10 – -1
0
+10 – +1
LF Revise (Cut Sheet)
Adjust a line feed amount in
cut-paper mode.
-14 – -1
0
+14 – +1
Skew correction
Enables/disables skew
correction and paper width
detection.
Invalid
Valid
Power on slice level adjust
Enables/disables slice level of
the paper width detection
sensor.
Invalid
Valid
ITEM
FUNCTION
SETTING