Oki OKIPAGE 4W PLUS Help Manual - page 17
English
Help Guide
17
Problem:
Printed paper curls excessively.
Solution:
Heat from the toner fusing process removes
moisture from paper and may cause curling. If
curling is severe:
(a) Turn paper over in the paper feeder. Put
paper in feeder with print facing the back of
the printer, look on the package for an arrow
or other indicator of the print side.
(b) A major cause of curl is improper storage.
Store paper in a dry place, lying flat. Do
not open the paper package until you are
ready to use the paper.
(c) Try to protect your paper from excessive
temperatures and rapid temperature changes.
Problem:
Printer seems too hot.
Solution:
The toner fusing process in your printer generates
a significant amount of heat, and the top cover
will feel quite warm. This is perfectly normal. If
the top cover becomes too hot to touch, switch
the printer off and call your dealer for advice.
Problem:
Printed paper emerges wrinkled.
Solution:
Use the printer control panel software to change
the paper thickness setting to light.
4whgGB1b.pm6
21/03/97, 12:37
17