1. DL manuals
  2. Oki
  3. Transceiver
  4. Pacemark PM4410
  5. User Manual

Oki Pacemark PM4410 User Manual

Manual is about: Oki Printer User Manual

Summary of Pacemark PM4410

  • Page 1

    Okilan 6010e pocket print server user’s guide high performance ethernet network print server.

  • Page 2

    Ii copyright and trademark information oki okilan 6010e user’s guide printing history every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Okidata assumes no responsibility for the results of errors beyond its control. Okidata also cannot ...

  • Page 3: Organization

    Iii organization and contents oki okilan 6010e user’s guide organization this manual has been divided into five sections. Section i contains installation instructions for the okilan 6010e pocket print server. Section ii contains information about management features, an extremely valuable set of oki...

  • Page 4: Section Iii: Netware

    Iv organization and contents oki okilan 6010e user’s guide section iii: netware chapter 1: introduction ................................................... Iii-5 chapter 2: okinet for netware ....................................... Iii-8 chapter 3: okinet for nds .......................................

  • Page 5: Network Operating Systems

    V network operating systems oki okilan 6010e user’s guide network operating systems overview okilan 6010e simultaneously supports several network protocols in various combinations. Below is a list of sup- ported network protocols accompanied with nos/os requirements. Novell netware novell netware ve...

  • Page 6: Service Information

    Vi technical support oki okilan 6010e user’s guide service information this information is valid for the united states and canada only . Okidata online visit the okidata web site at http://www.Okidata.Com for the latest information on: • software drivers • product guides • customer support • corpora...

  • Page 7: The Okidata Customer Support

    Vii technical support oki okilan 6010e user’s guide the okidata customer support center for customer service, call 1-800-okidata (800-654-3282). The okidata information system automated attendant is available 24 hours a day, 7 days a week. The system can provide immediate assistance with: • basic pr...

  • Page 8: Faxable Facts

    Viii technical support oki okilan 6010e user’s guide faxable facts you can have product and support information faxed automatically to you through okidata’s faxable facts, an online document retrieval system. A touch-tone telephone and facsimile machine with a designated telephone number are require...

  • Page 9: Mexico

    Ix technical support oki okilan 6010e user’s guide mexico oki data de mexico, s.A. De c.V. Tel: 525-661-6860 fax: 525-661-5861 argentina megatech tel: (541)-371-4123 fax: (541)-371-4123 [touch-tone © required] chile teknos communicaciones tel: 56 (2) 555 5530 fax: 56 (2)550 2390 venezuela mai de ven...

  • Page 10

    X technical support oki okilan 6010e user’s guide when you call customer support center, the following information will help us answer your questions more quickly and accurately. Please be able to identify the following: • serial number • configuration sheet settings • type of network cable connecte...

  • Page 11: Section I:

    Har d ware installation section i: hardware installation.

  • Page 13: In This  Section

    Har d ware installation i - 3 section i - hardware installation oki okilan 6010e user’s guide in this section powering on the okilan 6010e .................. I-7 printing a configuration sheet ...................... I-8.

  • Page 14

    I - 4 section i - hardware installation oki okilan 6010e user’s guide.

  • Page 15: Installing The Okilan 6010E

    Har d ware installation i - 5 section i - hardware installation oki okilan 6010e user’s guide the okilan 6010e pocket print server enables ethernet network users to connect to a printer with a bidirectional parallel port. The okilan 6010e can be made to work with any centronics or ieee-1284 paral- l...

  • Page 16

    I - 6 section i - hardware installation oki okilan 6010e user’s guide 3. Secure the okilan 6010e with the wire clips on the printer’s connector. 4. Plug the power adapter wire into the power jack on the okilan 6010e. Then plug the power adapter into a wall outlet..

  • Page 17: Powering On The Okilan 6010E

    Har d ware installation i - 7 section i - hardware installation oki okilan 6010e user’s guide 5. Attach the 10base-t utp cable to the receptacle on the back of the okilan 6010e. Attach the other end of the cable to the network. Powering on the okilan 6010e turn printer power on. The status indicator...

  • Page 18

    I - 8 section i - hardware installation oki okilan 6010e user’s guide note: if status indicator does not display as indicated above, see hardware troubleshooting at the end of this section. Printing a configuration sheet to print configuration information, press the test button on the side of the ok...

  • Page 19: Software In Windows

    Har d ware installation i - 9 section i - hardware installation oki okilan 6010e user’s guide installing the okilan utilities software in windows 1. Insert the okilan cd into your cd-rom drive. 2. The setup screen appears automatically (if it doesn’t, click start → run, then enter d:\setup, if “d” i...

  • Page 20: Tcp/ip Management Utilities

    I - 10 section i - hardware installation oki okilan 6010e user’s guide tcp/ip management utilities okinet utilities for tcp/ip okinet alert for tcp/ip okidata mib bootp server note: the okilan utilities cd is designed for more than one type of okilan print server and includes features that do not ap...

  • Page 21: Solution

    Har d ware installation i - 11 section i - hardware installation oki okilan 6010e user’s guide solution a) unplug the okilan 6010e power adapter from the wall outlet. Remove the network cable. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the sam...

  • Page 22: Led Display

    I - 12 section i - hardware installation oki okilan 6010e user’s guide failing the self test can be caused by any of the follow- ing: a) the printer is malfunctioning. Unplug the okilan 6010e from the printer and unplug the power adapter. Reconnect the okilan 6010e and the power adapter. If the okil...

  • Page 23: Section Ii:

    Ad v anced mana g ement section ii: advanced management features.

  • Page 25: In This  Section

    Ad v anced mana g ement ii - 3 section ii - advanced management features oki okilan 6010e user’s guide in this section chapter 1: snmp ................................. Ii-5 overview...................................................... Ii-5 private mib .................................................

  • Page 26

    Ii - 4 section ii - advanced management features oki okilan 6010e user’s guide reset .......................................................... Ii-22 okilan 6010e server discovery ............. Ii-23 troubleshooting ......................................... Ii-24 chapter 5: additional management fea...

  • Page 27: Chapter 1: Snmp

    Ad v anced mana g ement ii - 5 section ii - advanced management features oki okilan 6010e user’s guide chapter 1: snmp overview simple network management protocol (snmp) pro- vides network administrators with the ability to com- municate management functions between an snmp manager and an snmp agent...

  • Page 28: Traps

    Ii - 6 section ii - advanced management features oki okilan 6010e user’s guide the setting of certain variables causes an immediate firmware reset. These variables are listed in the private mib under cmdreset. Note: if you attempt a reset while a job is printing, the job may not print successfully. ...

  • Page 29: Security

    Ad v anced mana g ement ii - 7 section ii - advanced management features oki okilan 6010e user’s guide the okilan 6010e sends printer traps when there is a change in the status of the printer. If the printer goes off-line, runs out of paper or is detached, the adminis- trator will be notified via th...

  • Page 30

    Ii - 8 section ii - advanced management features oki okilan 6010e user’s guide both the okinet for tcp/ip and the ipx, and the okilan 6010e configuration utility (telnet) allow you to specify the community names and a trap destination ip address..

  • Page 31: Overview

    Ad v anced mana g ement ii - 9 section ii - advanced management features oki okilan 6010e user’s guide chapter 2: hp jetadmin support overview this section contains instructions and information on how to configure and obtain diagnostic information from your okilan 6010e using the hewlett-packard jet...

  • Page 32: The Print Server Context.

    Ii - 10 section ii - advanced management features oki okilan 6010e user’s guide 5. If you are running a netware 4.X network, click the netware directory services icon from the left column. Select nds tree name from the pull-down menu and enter the print server context. 6. Click the queues icon from ...

  • Page 33

    Ad v anced mana g ement ii - 11 section ii - advanced management features oki okilan 6010e user’s guide obtaining diagnostic information using jetadmin 1. From the main jetadmin screen, select the okilan 6010e port on which you wish to view diagnostic information. 2. Select properties from the devic...

  • Page 34: Chapter 3: Hp Web Jetadmin

    Ii - 12 section ii - advanced management features oki okilan 6010e user’s guide chapter 3: hp web jetadmin support overview this section contains instructions and information on how to configure, install, and obtain diagnostic infor- mation from your okilan 6010e using the hewlett- packard web jetad...

  • Page 35: Okilan 6010E

    Ad v anced mana g ement ii - 13 section ii - advanced management features oki okilan 6010e user’s guide installing a windows nt printer for the okilan 6010e 1. From the main web jetadmin page, select the okilan 6010e port you wish to install. 2. On the properties page, click the install printer butt...

  • Page 36: The Okilan 6010E

    Ii - 14 section ii - advanced management features oki okilan 6010e user’s guide obtaining diagnostic information from the okilan 6010e 1. From the main web jetadmin page, select the okilan 6010e port on which you wish to view diagnostic information. 2. Click the diagnose button. 3. From the properti...

  • Page 37: Configuration

    Ad v anced mana g ement ii - 15 section ii - advanced management features oki okilan 6010e user’s guide chapter 4: okilan 6010e web configuration overview this section contains instructions and information on how to configure and manage your okilan 6010e using a standard web browser. Software requir...

  • Page 38

    Ii - 16 section ii - advanced management features oki okilan 6010e user’s guide connecting to the okilan 6010e 1. Enter in the browser address prompt. The http address can be the ip address, the system name if the print server has been configured to use wins, or the dns name if registered with a dns...

  • Page 39

    Ad v anced mana g ement ii - 17 section ii - advanced management features oki okilan 6010e user’s guide 2. A successful connection will display the print server home page. Note: by default, only status and support information can be viewed. To configure the print server, see the configuration sectio...

  • Page 40: Configuration

    Ii - 18 section ii - advanced management features oki okilan 6010e user’s guide configuration 1. Select the login as admin link under the configuration menu. 2. On the enter network password screen, enter the user name and password. The default administrator user name is admin. The default administr...

  • Page 41

    Ad v anced mana g ement ii - 19 section ii - advanced management features oki okilan 6010e user’s guide 5. A request results page will appear indicat- ing one of the following: • configuration successfully set: the values have been successfully saved to the print server. Go to another page to contin...

  • Page 42: Web Admin Configuration

    Ii - 20 section ii - advanced management features oki okilan 6010e user’s guide * the following values are currently only configurable through the web browser interface: web admin configuration under the configuration menu, select the admin(web) link. • admin name – the name used to access full conf...

  • Page 43: Status

    Ad v anced mana g ement ii - 21 section ii - advanced management features oki okilan 6010e user’s guide • custom link title – this field is useful for setting up a link to an internal help desk. If configured, it will appear under the support menu. Will accommodate up to 24 charac- ters. • custom li...

  • Page 44: Updates

    Ii - 22 section ii - advanced management features oki okilan 6010e user’s guide updates by default this link will connect you to the firmware update location on the okidata ftp server. This link can be configured to point to other locations by select- ing the admin(web) link under the configuration ...

  • Page 45

    Ad v anced mana g ement ii - 23 section ii - advanced management features oki okilan 6010e user’s guide okilan 6010e server discovery an html file containing links to all okilan 6010e print servers on the network can be created using the okinet utility for tcp/ip. Complete the following steps to cre...

  • Page 46: Troubleshooting

    Ii - 24 section ii - advanced management features oki okilan 6010e user’s guide troubleshooting server connection • the print server only supports two simulta- neous http connections. If your browser fails to connect to the print server, the browser may be trying to open more than two connections. P...

  • Page 47: Login

    Ad v anced mana g ement ii - 25 section ii - advanced management features oki okilan 6010e user’s guide login • if you forget the administrator password, restoring the tcp/ip protocol to factory defaults from any other configuration utility restores the web admin name and password to default values....

  • Page 48: Features

    Ii - 26 section ii - advanced management features oki okilan 6010e user’s guide chapter 5: additional management features okinet alert oki okinet alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems before they are...

  • Page 49: Okinet For Nds

    Ad v anced mana g ement ii - 27 section ii - advanced management features oki okilan 6010e user’s guide okinet for nds okinet for nds allows administrators to create and manage oki print server objects in the nds tree. Okinet for nds integrates into novell’s netware administrator, netwareadmin. For ...

  • Page 50: Windows Printing

    Ii - 28 section ii - advanced management features oki okilan 6010e user’s guide windows printing from a windows operating system, using tcp/ip or dlc protocols, the okinet connect utility routes the print job to the appropriate printer without passing through a file server or print queue. This cuts ...

  • Page 51: Section Iii:

    Netw are section iii: netware.

  • Page 53: In This  Section

    Netw are iii - 3 section iii - netware oki okilan 6010e user’s guide in this section chapter 1: introduction ...................... Iii-5 overview..................................................... Iii-5 before you start .......................................... Iii-5 selecting pserver or rprinte...

  • Page 54

    Iii - 4 section iii - netware oki okilan 6010e user’s guide modifying view settings .......................... Iii-24 permanently defining snmp access information .......................................... Iii-27 chapter 3: okinet for nds ............... Iii-29 overview.................................

  • Page 55: Chapter 1: Introduction

    Netw are iii - 5 section iii - netware oki okilan 6010e user’s guide chapter 1: introduction overview this section contains instructions and information on how to configure your okilan 6010e in the netware environment. There are two environments in which to configure the okilan 6010e: • bindery (net...

  • Page 56: Mode

    Iii - 6 section iii - netware oki okilan 6010e user’s guide selecting pserver or rprinter/nprinter mode your okilan 6010e supports both pserver and nprinter mode. There are several factors to consider when choosing which mode to use. In pserver mode, the okilan 6010e operates as the print server. It...

  • Page 57

    Netw are iii - 7 section iii - netware oki okilan 6010e user’s guide e r u t a e f e d o m r e v r e s p r e t n i r p n / r e t n i r p r e d o m r e v r e s t n i r p t n i r p e t a r a p e s , e d o n r e v r e s r e v r e s t n i r p d n a , s n o i t c n u f t n i r p e r a w t e n e r a w t f...

  • Page 58: Overview

    Iii - 8 section iii - netware oki okilan 6010e user’s guide chapter 2: okinet for netware overview this chapter contains information about how to config- ure the okilan 6010e in bindery and nds environ- ments using the okinet for netware utility. Note: okinet for netware contains minimal nds configu...

  • Page 59: Okinet For Netware

    Netw are iii - 9 section iii - netware oki okilan 6010e user’s guide by default, the all print servers view is selected and all print servers attached to the network from which the okinet utility is running are listed. Configuring the okilan 6010e using okinet for netware the following steps outline...

  • Page 60

    Iii - 10 section iii - netware oki okilan 6010e user’s guide the following settings are configurable based on the capabilities of the okilan 6010e: • netware • netware queues • netware port • tcp/ip • protocols • output port • snmp • snmp traps netware configuration options to configure options spec...

  • Page 61: Pserver Or Rprinter Mode

    Netw are iii - 11 section iii - netware oki okilan 6010e user’s guide pserver or rprinter mode several factors should be considered when choosing between pserver or rprinter mode. For more detailed information regarding these modes, see page iii-4. Bindery settings • default file server – the defaul...

  • Page 62: Netware Queue Load Balancing

    Iii - 12 section iii - netware oki okilan 6010e user’s guide example: cn=marketinglj.Ou=marketing.O=companyname where cn is the common name of the leaf object, ou is the organizational unit name, and o is the organiza- tional name. Note: after any change to the servicing of queues for the okilan 601...

  • Page 63: Tcp/ip Configuration Options

    Netw are iii - 13 section iii - netware oki okilan 6010e user’s guide tcp/ip configuration options to modify configuration settings specific to the tcp/ip protocol such as ip address, subnet mask and default gateway. For specific information on tcp/ip configura- tion options, see section iv, tcp/ip,...

  • Page 64: Name Field

    Iii - 14 section iii - netware oki okilan 6010e user’s guide name field enter a descriptive name to identify the port. Language switching each output port can be configured to perform the following language switching options: off, pcl, postscript or automatic. Unless off is selected, a language swit...

  • Page 65: Printer Type

    Netw are iii - 15 section iii - netware oki okilan 6010e user’s guide printer type the printer type selection is used to determine the actual character string required for your printer. If your printer type is not listed, select other and enter the character string for switching the printer to pcl o...

  • Page 66: Snmp Configuration Options

    Iii - 16 section iii - netware oki okilan 6010e user’s guide snmp configuration options snmp options specify which information is necessary for an snmp manager to access the okilan 6010e. The system variables are for user convenience and are optional. Snmp community names are used as passwords to ge...

  • Page 67: System Name

    Netw are iii - 17 section iii - netware oki okilan 6010e user’s guide fill in the following information: system name enter the name of your choice. This name will identify the okilan 6010e in your snmp-based management program. System contact enter any information useful to a user if problems with t...

  • Page 68: Trap Community Name

    Iii - 18 section iii - netware oki okilan 6010e user’s guide trap community name enter the community name which will be used when traps are sent from the okilan 6010e. This setting allows trap utilities to only accept traps from devices with appropriate community names. The trap community name field...

  • Page 69: Protocol

    Netw are iii - 19 section iii - netware oki okilan 6010e user’s guide fill in the following information: protocol select the protocol for which you wish to configure trap information. Trap destination • netware protocol – enter the network number and hardware address, respectively, to which traps wi...

  • Page 70: Printer Traps

    Iii - 20 section iii - netware oki okilan 6010e user’s guide printer traps select the printer traps to be activated. The following printer conditions may cause a printer trap to occur: • on-line • off-line • no printer attached • paper out • toner low • paper jam • door open • printer error note: to...

  • Page 71: Information

    Netw are iii - 21 section iii - netware oki okilan 6010e user’s guide displaying okilan 6010e diagnostic information to view okilan 6010e diagnostic information, select diagnostics from the print server pull-down menu on the main netware print manager screen. Diagnostic information is available for ...

  • Page 72: Output Ports

    Iii - 22 section iii - netware oki okilan 6010e user’s guide restoring factory default settings to restore the okilan 6010e to factory default set- tings, select the okilan 6010e from the list of avail- able print servers. From the print server menu bar, select the reset option. Choose one or more o...

  • Page 73: Creating Customized Views

    Netw are iii - 23 section iii - netware oki okilan 6010e user’s guide creating customized views okinet for netware allows users to create multiple customized views for the list of okilan 6010e prod- ucts. By creating different views, the user can narrow the information displayed to that which is of ...

  • Page 74: Modifying View Settings

    Iii - 24 section iii - netware oki okilan 6010e user’s guide modifying view settings before modifying the settings, select the name of the view you wish to edit from the name field. Display filter the filter option displays only those print servers matching specific criteria. The print server list c...

  • Page 75: Search Filter

    Netw are iii - 25 section iii - netware oki okilan 6010e user’s guide mode the netware mode the print server is running network # the ipx network number search filter the search option defines the criteria for locating okilan 6010e products on the network. • search local network – this method search...

  • Page 76: Columns

    Iii - 26 section iii - netware oki okilan 6010e user’s guide columns column information for each print server can be modi- fied. To define the location of a new column, select the location in the columns displayed field where you wish the new column to be inserted, then select add. If no location is...

  • Page 77: Information

    Netw are iii - 27 section iii - netware oki okilan 6010e user’s guide permanently defining snmp access information access to okilan 6010e configuration and diagnostic information is determined by using community names. The special options window is used to permanently define access information so it...

  • Page 78: Add

    Iii - 28 section iii - netware oki okilan 6010e user’s guide add select the add button to define access to a new okilan 6010e or a group of okilan 6010e products. Enter a serial number or a network number followed by a dash (-). Use an asterisk (*) as a wildcard to match multiple devices. For exampl...

  • Page 79: Chapter 3: Okinet For Nds

    Netw are iii - 29 section iii - netware oki okilan 6010e user’s guide chapter 3: okinet for nds overview okinet for nds is a dynamic link library (dll) which allows users to create and manage oki print server objects in the nds tree. Okinet for nds inte- grates into novell’s netware administrator, a...

  • Page 80

    Iii - 30 section iii - netware oki okilan 6010e user’s guide • the okinet for nds installation for netware version 4.11 requires a separate installation for each of the three platforms: windows 3.X, windows 95 and/or windows nt (three separate versions of nwadmin). Refer to the following table to de...

  • Page 81: Netware 4.1

    Netw are iii - 31 section iii - netware oki okilan 6010e user’s guide installing okinet for nds for novell netware 4.1 a single installation is required to service windows 3.X and windows 95 operating systems with okinet for nds for novell netware 4.1. Okinet for nds must be installed in the same lo...

  • Page 82: [Snapin Object Dlls Win3X]

    Iii - 32 section iii - netware oki okilan 6010e user’s guide installing okinet for nds for novell netware 4.11 and windows 3.X okinet for nds must be installed in the same location you have installed netware administrator. This may be located on the file server or on an independent worksta- tion. In...

  • Page 83: [Snapin Object Dlls Win3X]

    Netw are iii - 33 section iii - netware oki okilan 6010e user’s guide installing okinet for nds for novell netware 4.11 and windows 95/windows nt okinet for nds must be installed in the same location you have installed netware administrator. This may be located on the file server or on an independen...

  • Page 84

    Iii - 34 section iii - netware oki okilan 6010e user’s guide installing okinet for nds for novell netware 4.11 and windows 95/windows nt okinet for nds must be installed in the same location you have installed netware administrator. This may be located on the file server or on an independent worksta...

  • Page 85: Sales.

    Netw are iii - 35 section iii - netware oki okilan 6010e user’s guide creating a new okilan 6010e object to create a new okilan 6010e object from novell’s netware administrator, perform the following steps: 1. Select the container (also known as organi- zational unit) in which you want the object cr...

  • Page 86: 6. Click Ok.

    Iii - 36 section iii - netware oki okilan 6010e user’s guide 6. Click ok. Note: if the device list box is still empty, select find device. This will allow you to locate the specific device you are trying to define. You will be prompted for the ethernet address and network number of the device. A mis...

  • Page 87: 6. Select Assign

    Netw are iii - 37 section iii - netware oki okilan 6010e user’s guide 3. Open the oki print server object’s details dialog. This may be done by double-clicking on the oki print server icon in the nds tree or by selecting details from the file menu. 4. If your okilan 6010e supports both pserver and n...

  • Page 88: Okinet For Nds

    Iii - 38 section iii - netware oki okilan 6010e user’s guide 11. Select or create a netware print server object from the assignments page. 12. Select a port to configure from the assign- ments page, then select assign. 13. Select or create a netware printer object from the printer/queue assignments ...

  • Page 89: The Help Button.

    Netw are iii - 39 section iii - netware oki okilan 6010e user’s guide the following settings are configurable: • identification • network protocols • assignments • port configuration • network configuration • status for specific information about these detail pages, select the help button. Adding or...

  • Page 90

    Iii - 40 section iii - netware oki okilan 6010e user’s guide the install utility on the installation diskette can also be used to remove the oki print server class. This utility removes the class from novell’s netware administrator and removes all the associated files that were copied during the ins...

  • Page 91: Section Iv:

    Tcp/ip section iv: tcp/ip.

  • Page 92: In This  Section

    In this section chapter 1: introduction ...................... Iv-6 overview..................................................... Iv-6 software requirements .............................. Iv-6 network preparation................................... Iv-7 before you start .................................

  • Page 93

    Tcp/ip iv - 3 section iv - tcp/ip oki okilan 6010e user’s guide running okinet for tcp/ip ..................... Iv-29 configuring the okilan 6010e using okinet for tcp/ip............................... Iv-30 configuring tcp/ip options .................... Iv-31 netware and netware port configuration...

  • Page 94: Appendix B: Application

    Iv - 4 section iv - tcp/ip oki okilan 6010e user’s guide changing the password (option 2) .......... Iv-55 specify print server ip address (option 3) ............................................ Iv-55 specify the subnet mask for your network (option 4) ............................. Iv-56 identify de...

  • Page 95

    Tcp/ip iv - 5 section iv - tcp/ip oki okilan 6010e user’s guide configuring hp-ux v9.Xx for printing with the okilan 6010e .................................... Iv-84 configuring hp-ux v10.Xx for printing with the okilan 6010e .............................. Iv-89 configuring sco unix for printing wit...

  • Page 96: Chapter 1: Introduction

    Iv - 6 section iv - tcp/ip oki okilan 6010e user’s guide chapter 1: introduction overview this section contains instructions and information on how to configure your okilan 6010e. You will also be instructed on how to set up your host computers to print to the okilan 6010e using the tcp/ip protocol....

  • Page 97: Network Preparation

    Tcp/ip iv - 7 section iv - tcp/ip oki okilan 6010e user’s guide network preparation • you should be familiar with network admin- istration as well as the physical setup and operation of your network. • advise users of possible disruption during installation. • make sure the serial number and etherne...

  • Page 98

    Iv - 8 section iv - tcp/ip oki okilan 6010e user’s guide overview of tcp/ip configuration • assign an ip address for the okilan 6010e • configure the okilan 6010e network information • configure hosts for printing to the okilan 6010e • test print (optional).

  • Page 99: 6010E

    Tcp/ip iv - 9 section iv - tcp/ip oki okilan 6010e user’s guide chapter 2: configuring the okilan 6010e choosing an ip address every tcp/ip network device is required to have a unique ip address. The ip address can be permanently stored using one of the following: • oki okinet management utilities f...

  • Page 100: Configuring The Okilan 6010E

    Iv - 10 section iv - tcp/ip oki okilan 6010e user’s guide 2. Add the name and ip address to the “/etc/ hosts” file of each host that will access the okilan 6010e. Or, if your network uses a name service, add the host name and ip address to the name server. Most tcp/ip networks use the network inform...

  • Page 101: Assigning The Ip Address

    Tcp/ip iv - 11 section iv - tcp/ip oki okilan 6010e user’s guide assigning the ip address there are eight different methods for assigning an ip address to the okilan 6010e: gleaning, static route entry, dhcp, rarp, bootp and using the okinet utilities. Gleaning, static route entry and rarp require t...

  • Page 102: Dhcp

    Iv - 12 section iv - tcp/ip oki okilan 6010e user’s guide 2. Start a continuous ping to the okilan 6010e. Ping ip_address> example: ping 192.168.42.24 on some systems, this may require an additional pa- rameter. Some implementations of ping only send out one ping packet which could get lost in trans...

  • Page 103

    Tcp/ip iv - 13 section iv - tcp/ip oki okilan 6010e user’s guide dhcp offers dynamic ip address allocation. When a client receives an ip address, it also receives a lease (an amount of time the host may use the address). The lease times vary from 1 hour to 100 years, or may be infinite. When the lea...

  • Page 104: Static Route Entry

    Iv - 14 section iv - tcp/ip oki okilan 6010e user’s guide static route entry when the okilan 6010e is powered on or reset and no permanent ip address has been assigned, it will attempt to obtain an ip address through gleaning, rarp, bootp or dhcp. If the okilan 6010e has not deter- mined its ip addr...

  • Page 105: Rarp Or Bootp

    Tcp/ip iv - 15 section iv - tcp/ip oki okilan 6010e user’s guide rarp or bootp if an ip address has not been permanently assigned, the okilan 6010e will use reverse address resolution protocol (rarp) or bootstrap protocol (bootp). The okilan 6010e will broadcast requests for its ip ad- dress to both...

  • Page 106: Other Utilities

    Iv - 16 section iv - tcp/ip oki okilan 6010e user’s guide other utilities the ip address can also be set from novell netware using the okinet for netware utility. Note: the okinet for netware utilities can only be used if novell netware is installed on your network. Verifying access to the okilan 60...

  • Page 107: And Printing

    Tcp/ip iv - 17 section iv - tcp/ip oki okilan 6010e user’s guide chapter 3: tcp/ip configuration and printing overview the okilan 6010e supports printing from computers using tcp/ip and any of the following printing proto- cols: • line printer redirect/line printer daemon (lpr/lpd) • file transfer p...

  • Page 108: Remote Print Queue Name

    Iv - 18 section iv - tcp/ip oki okilan 6010e user’s guide configuring for tcp/ip network printing most computers that support tcp/ip network printing use the remote line printer daemon (lpd) protocol. This protocol was originally part of the berkeley soft- ware distribution (bsd) version of the unix...

  • Page 109

    Tcp/ip iv - 19 section iv - tcp/ip oki okilan 6010e user’s guide the okilan 6010e is designed to handle many differ- ent types of printers and print data. Typically you will select the printer type for your printer in telnet under the configure port option. However, if you are connect- ing to an asc...

  • Page 110

    Iv - 20 section iv - tcp/ip oki okilan 6010e user’s guide in addition to the form feed described above, the okilan 6010e inserts a carriage-return character into the print job immediately before each line-feed character. This feature is useful for printing unix text files. Nf use the nf suffix at th...

  • Page 112: Log_File_Name

    Iv - 22 section iv - tcp/ip oki okilan 6010e user’s guide log_file_name this is the path to a file where error information from the lpd will be logged. Example: if you are printing to an ascii printer that requires a carriage return/line feed, you may need two separate printcap entries: one entry fo...

  • Page 113: Remote Lpd Printing

    Tcp/ip iv - 23 section iv - tcp/ip oki okilan 6010e user’s guide remote lpd printing the way print jobs are queued to a remote lpd system varies among the vendors that support tcp/ip. Unix systems that are bsd-based typically use the lpr pro- gram to submit print jobs. Other unix systems may use the...

  • Page 114: Put

    Iv - 24 section iv - tcp/ip oki okilan 6010e user’s guide the okilan 6010e recognizes the following ftp commands: put print a single file the put command sends the file to the okilan 6010e. The first parameter of the put command is the name of the local file to put. The second parameter of the put c...

  • Page 115: Mode

    Tcp/ip iv - 25 section iv - tcp/ip oki okilan 6010e user’s guide mode specifies transfer mode. Stream is the only transfer mode sup- ported. Open opens connection to remote host. Close terminates ftp session. Quit terminates ftp session and exits ftp. Bye equivalent to quit. Okilan 6010e print serve...

  • Page 116: Timeout Checking

    Iv - 26 section iv - tcp/ip oki okilan 6010e user’s guide $ ftp okilan 6010e_name connected to okilan 6010e_name. 220 esi-2810 version 3.0 ready. Name (okilan 6010e_name:anyone): 230 user logged in. Ftp> binary 200 type set to i. Ftp> put chart.Ps mpx1 local: chart.Ps remote: mpx1 200 port command s...

  • Page 117: Raw Port Printing

    Tcp/ip iv - 27 section iv - tcp/ip oki okilan 6010e user’s guide raw port printing host computer software can use a raw tcp/ip port connection to send data to the okilan 6010e. A tcp/ ip port has been assigned to the output port of the okilan 6010e as follows: t r o p p i / p c t t r o p t u p t u o...

  • Page 118: Overview

    Iv - 28 section iv - tcp/ip oki okilan 6010e user’s guide chapter 4: okinet for tcp/ip overview this section contains information about okinet for tcp/ip. Okinet for tcp/ip provides snmp-based support for the entire okilan 6010e family of print servers. Okinet for tcp/ip allows you to: • easily assi...

  • Page 119: Running Okinet For Tcp/ip

    Tcp/ip iv - 29 section iv - tcp/ip oki okilan 6010e user’s guide okinet for tcp/ip requires that the tcp/ip protocol is running using a winsock (windows sockets) tcp/ip stack, version 1.1 or greater. A winsock tcp/ip proto- col stack is available from many vendors including the following: • microsof...

  • Page 120: Okinet For Tcp/ip

    Iv - 30 section iv - tcp/ip oki okilan 6010e user’s guide configuring the okilan 6010e using okinet for tcp/ip the following steps outline how to configure an okilan 6010e. To change settings of a previously configured okilan 6010e, follow the same procedure but skip step 3, as no prompt will appear...

  • Page 121: Configuring Tcp/ip Options

    Tcp/ip iv - 31 section iv - tcp/ip oki okilan 6010e user’s guide configuring tcp/ip options to configure options specific to the tcp/ip protocol, select the tcp/ip tab. The following screen will dis- play:.

  • Page 122: Ip Address Resolution

    Iv - 32 section iv - tcp/ip oki okilan 6010e user’s guide fill in the following information: ip address resolution • set permanent – select this option to make the ip address permanent. If the okilan 6010e has been configured to remember its ip address, it does not need to determine its address each...

  • Page 123: Default Gateway

    Tcp/ip iv - 33 section iv - tcp/ip oki okilan 6010e user’s guide default gateway if your local network is attached to other networks, you can specify the address of your default gateway. This gateway will be selected whenever messages need to be sent to another network. The gateway address must foll...

  • Page 124: Tion Options

    Iv - 34 section iv - tcp/ip oki okilan 6010e user’s guide netware and netware port configura- tion options for specific information on netware or netware port options, see section iii, novell netware, or select the help button on the bottom right of the screen. Netware queues configuration options t...

  • Page 125: Port Number

    Tcp/ip iv - 35 section iv - tcp/ip oki okilan 6010e user’s guide port number select the port number you wish to configure. Name field enter a descriptive name to identify the port. Language switching each output port can be configured to perform the following language switching options: off, pcl, po...

  • Page 126: Printer Type

    Iv - 36 section iv - tcp/ip oki okilan 6010e user’s guide • off – print data stream will be sent directly to the output port without alteration. • pcl – inserts the appropriate character string in front of each print job to switch the printer to the pcl print language. • postscript – inserts the app...

  • Page 127: Postscript Switch Sequence

    Tcp/ip iv - 37 section iv - tcp/ip oki okilan 6010e user’s guide postscript switch sequence enter the character string to switch the printer to the postscript print language. Configuration page language select the appropriate printer language for printing configuration pages on your printer. Output ...

  • Page 128: System Name

    Iv - 38 section iv - tcp/ip oki okilan 6010e user’s guide note: snmp options need to be configured only if you are managing an okilan 6010e or getting system information using snmp. System name enter the name of your choice. This name will identify the okilan 6010e in your snmp-based management prog...

  • Page 129: Get Community Name

    Tcp/ip iv - 39 section iv - tcp/ip oki okilan 6010e user’s guide get community name this field is used to set the community name required to get information from the print server. The default community name is public. Note: for jetadmin to function correctly with the okilan 6010e, the snmp get and s...

  • Page 130: Enabling/disabling Protocols

    Iv - 40 section iv - tcp/ip oki okilan 6010e user’s guide enabling/disabling protocols to enable or disable protocols on the okilan 6010e, select the protocols tab. Select each protocol you wish to enable. If you disable a protocol, the okilan 6010e will no longer communicate using that protocol. Sn...

  • Page 131: Protocol

    Tcp/ip iv - 41 section iv - tcp/ip oki okilan 6010e user’s guide protocol select the protocol for which you wish to configure trap information. Trap destination • tcp/ip protocol – enter the ip address to which traps will be sent. The ip address must follow the format xxx.Xxx.Xxx.Xxx, where each xxx...

  • Page 132: Printer Traps

    Iv - 42 section iv - tcp/ip oki okilan 6010e user’s guide printer traps select the printer traps to be activated. The following printer error conditions may cause a printer trap to occur: • on-line • off-line • no printer attached • paper out • paper jam • door open • toner low • printer error the t...

  • Page 133: Information

    Tcp/ip iv - 43 section iv - tcp/ip oki okilan 6010e user’s guide displaying okilan 6010e diagnostic information to view okilan 6010e diagnostic information, double click on diagnostics from the print server pull-down menu on the main okinet tcp/ip screen. Diagnostic information is available on the f...

  • Page 134: Select Reset.

    Iv - 44 section iv - tcp/ip oki okilan 6010e user’s guide restoring factory default settings to restore the okilan 6010e to factory default set- tings, select the okilan 6010e from the list of avail- able print servers. From the print server menu bar, select reset. From the reset print server screen...

  • Page 135: Creating Customized Views

    Tcp/ip iv - 45 section iv - tcp/ip oki okilan 6010e user’s guide creating customized views okinet for tcp/ip allows users to create multiple customized views for the list of okilan 6010e prod- ucts. By creating different views, the user can narrow the information displayed to that which is of highes...

  • Page 136: Selecting An Existing View

    Iv - 46 section iv - tcp/ip oki okilan 6010e user’s guide selecting an existing view to select an existing view, choose select from the view menu. Highlight the view you wish to open and select ok. The okilan 6010e list will be displayed as described by the view selected. Modifying view settings bef...

  • Page 137: Search Filter

    Tcp/ip iv - 47 section iv - tcp/ip oki okilan 6010e user’s guide h/w address 12 hexadecimal digits for the ethernet address ip address xxx.Xxx.Xxx.Xxx; use “*” for groups / subnets name snmp system name (sys name) for the print server product # select from the list of product number(s) product type ...

  • Page 138: Example: 192.168.42.24

    Iv - 48 section iv - tcp/ip oki okilan 6010e user’s guide • specify devices/networks – this method adds specific print servers (or groups of print servers) to the list. If you have okilan 6010e print servers that are not on the local network (i.E. Across rout- ers), the address of each okilan 6010e ...

  • Page 139: 3. Select Add.

    Tcp/ip iv - 49 section iv - tcp/ip oki okilan 6010e user’s guide for example, if you currently have three columns displayed and you wish to add a fourth column to the far left of the screen, follow these steps: 1. Select the first column in the columns displayed field. 2. Select the column to be add...

  • Page 140: Information

    Iv - 50 section iv - tcp/ip oki okilan 6010e user’s guide permanently defining snmp access information access to okilan 6010e configuration and diagnostic information is determined by using community names. The special options window is used to permanently define access information so that it does n...

  • Page 141: Add

    Tcp/ip iv - 51 section iv - tcp/ip oki okilan 6010e user’s guide add select the add button to define access to a new okilan 6010e or a group of okilan 6010e print servers. The ip address must follow the format xxx.Xxx.Xxx.Xxx, where each xxx is a number from 0 to 255. Use * to specify groups/subnets...

  • Page 142: Starting A Telnet Session

    Iv - 52 section iv - tcp/ip oki okilan 6010e user’s guide starting a telnet session a simple telnet interface has been provided to commu- nicate with devices supporting telnet. A telnet session can be started by selecting the okilan 6010e from the print server list and choosing the telnet session op...

  • Page 143: Overview

    Tcp/ip iv - 53 section iv - tcp/ip oki okilan 6010e user’s guide chapter 5: telnet configuration overview the okilan 6010e configuration utility (telnet) provides system, network and printer status information and allows you to change the configuration of your okilan 6010e. Note: the configuration o...

  • Page 144: Press Enter.

    Iv - 54 section iv - tcp/ip oki okilan 6010e user’s guide 3. When you are finished typing your pass- word, press enter. For password verifica- tion, you will then be asked to enter your password again. Each time you use the utility, you will be asked to enter your password. If you fail to enter the ...

  • Page 145: (Option 1)

    Tcp/ip iv - 55 section iv - tcp/ip oki okilan 6010e user’s guide showing network/printer information (option 1) this option displays current network and printer infor- mation. Changing the password (option 2) this option allows you to change the password required for access to this utility. We recom...

  • Page 146: Network (Option 4)

    Iv - 56 section iv - tcp/ip oki okilan 6010e user’s guide remember, when choosing a permanent ip address: • the ip address must follow the format xxx.Xxx.Xxx.Xxx, where each xxx is a number between 0 and 255. • if you select an invalid ip address you may not be able to access the okilan 6010e. • you...

  • Page 147: (Option 5)

    Tcp/ip iv - 57 section iv - tcp/ip oki okilan 6010e user’s guide if you change the subnet mask, the change will remain undetected until the okilan 6010e is reset or is power cycled. Note: if you select an invalid subnet mask you may not be able to access the okilan 6010e. Use this option with care! ...

  • Page 148: Configure Port (Option 6)

    Iv - 58 section iv - tcp/ip oki okilan 6010e user’s guide configure port (option 6) after the configure menu appears, you can access the following configuration option screens. Specify configuration page language this option enables you to select how the okilan 6010e configuration pages should be pr...

  • Page 149: Tcp Connection Configuration

    Tcp/ip iv - 59 section iv - tcp/ip oki okilan 6010e user’s guide tcp connection configuration (option 7) tcp connection timeout this is used to sever network tcp/ip connections that are idle for more than a specified period of time (be- tween 1 and 3600 seconds). You can also disable timeout checkin...

  • Page 150: Restore to Factory Default

    Iv - 60 section iv - tcp/ip oki okilan 6010e user’s guide restore to factory default configuration (option 9) this option automatically restores the okilan 6010e to its original factory defaults. Be aware that when you restore the okilan 6010e to the original factory default settings, only the tcp/i...

  • Page 151: Appendix A: Troubleshooting

    Tcp/ip iv - 61 section iv - tcp/ip oki okilan 6010e user’s guide appendix a: troubleshooting main status indicator upon power-up, the main status indicator flashes orange. It changes to green when the okilan 6010e passes self-test. The indicator stays orange if the okilan 6010e fails self-test. If t...

  • Page 152: Unable to Assign Ip Address

    Iv - 62 section iv - tcp/ip oki okilan 6010e user’s guide unable to assign ip address gleaning if you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • verify the arp table contains the correct hardware and ip address by running the ‘a...

  • Page 153: Rarp Or Bootp

    Tcp/ip iv - 63 section iv - tcp/ip oki okilan 6010e user’s guide rarp or bootp if you are using a bootp or rarp server and the okilan 6010e is not getting an ip address, check the following: • verify the bootp/rarp configuration files are correctly set up (“/etc/ethers” and “/etc/hosts” for rarp and...

  • Page 154: Example:

    Iv - 64 section iv - tcp/ip oki okilan 6010e user’s guide • some bootp servers will write their internal bootptab tables to a file when they receive a sigusr1 signal. You can check this file to verify the hardware and ip ad- dress are correct. You can use the kill com- mand to send signals. For exam...

  • Page 155

    Tcp/ip iv - 65 section iv - tcp/ip oki okilan 6010e user’s guide • verify the okilan 6010e is on the same subnet as the host from which you are telneting. As a drastic measure, try creating an isolated subnet with your host and the okilan 6010e. If you are using 10base2, run the cable directly from ...

  • Page 156: Hardware Error Messages

    Iv - 66 section iv - tcp/ip oki okilan 6010e user’s guide okinet for tcp/ip – winsock errors • if you see an error before okinet for tcp/ip appears on the screen, try setting a host name in the hosts file in the windows directory (check the documentation for your windows tcp/ip stack). • if you have...

  • Page 157: System Crc Failed

    Tcp/ip iv - 67 section iv - tcp/ip oki okilan 6010e user’s guide if you find the cable is connected and you are still receiving this message or any other “st:” error mes- sage, power cycle the okilan 6010e. If the error continues, call okidata customer support at 1-800-okidata (1-800-654-3282). Syst...

  • Page 158: Unable to Print

    Iv - 68 section iv - tcp/ip oki okilan 6010e user’s guide if you do not know the configuration of the okilan 6010e or you think the configuration has been changed, use the following method for printing a configuration page: • with the network cable detached, attach the okilan 6010e to a printer and ...

  • Page 159: Ftp

    Tcp/ip iv - 69 section iv - tcp/ip oki okilan 6010e user’s guide • if the ping succeeds, try ftping a test file to the print server. If the ping fails, you might have a configuration problem with the okilan 6010e (the ip address or gateway address might be incorrect, etc.). • if the ftp succeeds, th...

  • Page 160: Ations

    Iv - 70 section iv - tcp/ip oki okilan 6010e user’s guide appendix b: application consider- ations overview this appendix provides application notes for the follow- ing: • assigning the okilan 6010e ip address with bootp • assigning the okilan 6010e ip address with rarp • using the windows nt v3.5 l...

  • Page 161: With Bootp

    Tcp/ip iv - 71 section iv - tcp/ip oki okilan 6010e user’s guide assigning the okilan 6010e ip address with bootp bootp is an acronym for bootstrap protocol. Every tcp/ip network device is required to have a unique 32- bit ip address assigned to it. Tcp/ip network devices will have both an ip addres...

  • Page 162: Configuration File

    Iv - 72 section iv - tcp/ip oki okilan 6010e user’s guide ip addresses are 32-bits and are expressed in 4 bytes (decimal format) usually separated by periods. Each decimal byte has a range from 0 to 255. Example: 192.168.42.1 configuration file the purpose of bootp is to look up a 32-bit ip address ...

  • Page 163

    Tcp/ip iv - 73 section iv - tcp/ip oki okilan 6010e user’s guide the ht signifies hardware type. For the okilan 6010e, it will always be ether for an ethernet device and token for a token-ring device. The ha signifies the network hardware address. For bootp, the network hardware address must be repr...

  • Page 164: Limitations

    Iv - 74 section iv - tcp/ip oki okilan 6010e user’s guide 4. The bootpd daemon transmits a response to the okilan 6010e with the ip address 192.168.42.55. The okilan 6010e will use this ip address for all subsequent transmis- sions. For these steps to work properly, at least one bootp daemon (bootpd...

  • Page 165: Dress With Rarp

    Tcp/ip iv - 75 section iv - tcp/ip oki okilan 6010e user’s guide or • your router(s) are configured to forward bootp packets between the okilan 6010e’s subnet and the subnet of the host running the bootp server. Configuring the okilan 6010e ip ad- dress with rarp rarp is an acronym for reverse addre...

  • Page 166: Address Formats

    Iv - 76 section iv - tcp/ip oki okilan 6010e user’s guide address formats network hardware addresses are 48-bits and are ex- pressed in 6 bytes in hexadecimal format usually sepa- rated by colons. Each hexadecimal byte has a range from 00 to ff. Example: 00:02:16:17:50:a4 ip addresses are 32-bits an...

  • Page 167

    Tcp/ip iv - 77 section iv - tcp/ip oki okilan 6010e user’s guide /etc/ethers: the “/etc/ethers” file is where each entry maps a host name to a network hardware address. An example entry is shown below. 00:02:16:17:50:a4 okiprinter the following sequence of events occurs during the power up of the ok...

  • Page 168: Limitations

    Iv - 78 section iv - tcp/ip oki okilan 6010e user’s guide 5. The rarpd daemon transmits a response to the okilan 6010e with the ip address 192.168.42.55. The okilan 6010e will then use this ip address for all subsequent transmissions. For all these steps to work properly, at least one rarp daemon (r...

  • Page 169: With The Okilan 6010E

    Tcp/ip iv - 79 section iv - tcp/ip oki okilan 6010e user’s guide configuring hp-ux v8.07 for printing with the okilan 6010e this application note describes the configuration of the printing system on the hp-ux ver. 8.07 of the unix operating system. For clarity and brevity, the following specific na...

  • Page 170: Prerequisites

    Iv - 80 section iv - tcp/ip oki okilan 6010e user’s guide prerequisites before you proceed, the following prerequisites must be met. Most of the time, steps 2 through 5 are already configured since the hp-ux system is on a tcp/ip network. Do not perform steps 2 through 5 unless the installation proc...

  • Page 171: Man Inetd.Conf.

    Tcp/ip iv - 81 section iv - tcp/ip oki okilan 6010e user’s guide this is helpful if the daemon was terminated for some reason. For more information on inetd or “/etc/inetd.Conf”, type man inetd or man inetd.Conf. 4. Make sure the following entry is in the “/etc/ services” file printer 515/tcp spoole...

  • Page 172: A) Printer Name – Lj4

    Iv - 82 section iv - tcp/ip oki okilan 6010e user’s guide a form appears asking you to define a remote printer. 4. Enter information into the following fields as described. A) printer name – lj4 this is the name of the printer as refer- enced by the local hp machine. Print jobs sent to this printer ...

  • Page 173: Or N) – N

    Tcp/ip iv - 83 section iv - tcp/ip oki okilan 6010e user’s guide f) make this the system default printer? (y or n) – n g) printer class – (optional) h) restrict cancel – (optional) i) remote printer on a bsd system? (y or n) – y tells the hp-ux system that it is com- municating with a berkeley style...

  • Page 174: With The Okilan 6010E

    Iv - 84 section iv - tcp/ip oki okilan 6010e user’s guide configuring hp-ux v9.Xx for printing with the okilan 6010e this application note describes the configuration of the printing system on the hp-ux ver. 9.Xx of the unix operating system. For clarity and brevity, the following specific names wil...

  • Page 175: Prerequisites

    Tcp/ip iv - 85 section iv - tcp/ip oki okilan 6010e user’s guide prerequisites before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already configured since the hp-ux system is on a tcp/ip network. Do not perform steps 2 through 5 unless the installatio...

  • Page 176: Rlpdaemon” Rlpdaemon –I

    Iv - 86 section iv - tcp/ip oki okilan 6010e user’s guide 3. Make sure the following entry is in the “/etc/ inetd.Conf” file: printer stream tcp nowait root “/usr/lib/ rlpdaemon” rlpdaemon –i if the rlp daemon is not running when a print request is made, this entry in “/etc/ inetd.Conf” will tell in...

  • Page 177: A) Printer Name – Lj4

    Tcp/ip iv - 87 section iv - tcp/ip oki okilan 6010e user’s guide 2. Invoke the sam utility by typing sam at the unix prompt. (we suggest you do this at the system console. Sam uses a screen oriented interface that works best at the console.) 3. Select the following options from the sam menu: printer...

  • Page 178: Completed, Select Ok.

    Iv - 88 section iv - tcp/ip oki okilan 6010e user’s guide this is the name of the queue on the okilan 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. D) remote cancel model – rcmodel used for remote printer job removal. E) remote status model – rsmodel...

  • Page 179: Lp –D Lj4 Filename

    Tcp/ip iv - 89 section iv - tcp/ip oki okilan 6010e user’s guide 7. Select the exit sam button. 8. Test printing to the okilan 6010e with the following command: lp –d lj4 filename configuring hp-ux v10.Xx for printing with the okilan 6010e this application note describes the configuration of the pri...

  • Page 180: Prerequisites

    Iv - 90 section iv - tcp/ip oki okilan 6010e user’s guide if ff, lf or nf are the last two letters of the queue name, the job will be converted accordingly. See the section on remote queue names. Prerequisites before you proceed, the following prerequisites must be met. Most of the time steps 2 thro...

  • Page 181: Rlpdaemon” Rlpdaemon –I

    Tcp/ip iv - 91 section iv - tcp/ip oki okilan 6010e user’s guide 3. Make sure the following entry is in the “/etc/ inetd.Conf” file: printer stream tcp nowait root “/usr/lib/ rlpdaemon” rlpdaemon –i if the rlp daemon is not running when a print request is made, this entry in “/etc/ inetd.Conf” will ...

  • Page 182: A) Printer Name – Lj4

    Iv - 92 section iv - tcp/ip oki okilan 6010e user’s guide 2. Invoke the sam utility by typing sam at the unix prompt. (we suggest you do this at the system console. Sam uses a screen oriented interface that works best at the console.) 3. Select the following options from the sam menu: printers and p...

  • Page 183: Completed, Select Ok.

    Tcp/ip iv - 93 section iv - tcp/ip oki okilan 6010e user’s guide c) remote printer name – yourqueuename this is the name of the queue on the okilan 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. D) remote cancel model – rcmodel used for remote printer...

  • Page 184: Lp –D Lj4 Filename

    Iv - 94 section iv - tcp/ip oki okilan 6010e user’s guide 6. Pull down the lists menu and select exit. 7. Select the exit sam button. 8. Test printing to the okilan 6010e with the following command: lp –d lj4 filename configuring sco unix for printing with the okilan 6010e this application note desc...

  • Page 185: Prerequisites

    Tcp/ip iv - 95 section iv - tcp/ip oki okilan 6010e user’s guide • yourqueuename – this is the name of the queue on the okilan 6010e and must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queue name, the job will be co...

  • Page 186: Lj4:\

    Iv - 96 section iv - tcp/ip oki okilan 6010e user’s guide 3. If remote line printing is already installed, mkdev rlp will respond with the message remote line printing working directory already exists. Do you wish to continue installing the remote line printing system? Answer no to this prompt and s...

  • Page 187: Spool/lpd/lj4

    Tcp/ip iv - 97 section iv - tcp/ip oki okilan 6010e user’s guide 7. At the unix prompt, type: mkdir /usr/ spool/lpd/lj4 8. Type: touch/usr/spool/lpd/lj4/lj4.Log 9. Try printing to the okilan 6010e by issuing the following command: lp –d lj4 filename ibm’s aix ver. 3.X for printing with the okilan 60...

  • Page 188: Prerequisites

    Iv - 98 section iv - tcp/ip oki okilan 6010e user’s guide • yourqueuename – this is the name of the queue on the okilan 6010e and must end with 1 or 2, depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queue name, the job will be converted acco...

  • Page 189: Okiprinter

    Tcp/ip iv - 99 section iv - tcp/ip oki okilan 6010e user’s guide a form appears asking you to define a remote print queue. 4. Enter information into the following fields as described. All other fields should use the default value. A) name of queue to add – lj4 this is the name of the local print que...

  • Page 190: Aix> Startsrc –S Qdaemon

    Iv - 100 section iv - tcp/ip oki okilan 6010e user’s guide 5. Start the lpd subsystem with smit: spooler (print jobs and printers) manage remote printer subsystem server services lpd remote printer subsystem start using the lpd subsystem start both now and at system restart 6. Start the qdaemon by t...

  • Page 191: Prerequisites

    Tcp/ip iv - 101 section iv - tcp/ip oki okilan 6010e user’s guide • okiprinter – the host name of the remote system which is the okilan 6010e. For example, to telnet to the okilan 6010e and invoke the okilan 6010e configura- tion utility, you would type telnet okiprinter. A host name is not required...

  • Page 192: Procedure

    Iv - 102 section iv - tcp/ip oki okilan 6010e user’s guide procedure to configure the solaris machine so users can spool print jobs to the pcl print queue on the okilan 6010e named okiprinter, do the following: 1. Login to the solaris machine as root. 2. Type: lpsystem –t bsd okiprinter 3. Type: lpa...

  • Page 193: Prerequisites

    Tcp/ip iv - 103 section iv - tcp/ip oki okilan 6010e user’s guide • okiprinter – the host name of the remote system which is the okilan 6010e. For example, to telnet to the okilan 6010e and invoke the okilan 6010e configura- tion utility, you would type telnet okiprinter. A host name is not required...

  • Page 195: Procedure

    Tcp/ip iv - 105 section iv - tcp/ip oki okilan 6010e user’s guide procedure to configure the sun-os or ultrix machine so that users can spool print jobs to the pcl print queue on the okilan 6010e named okiprinter, do the follow- ing: 1. Login to the sun-os or ultrix machine as root. 2. Using a text ...

  • Page 197: Section V:

    Windo ws printing section v: windows printing.

  • Page 199: In This  Section

    Windo ws printing v - 3 section v - windows printing oki okilan 6010e user’s guide in this section chapter 1: okilan 6010e set up for windows nt 4.0 .............................. V-5 overview.......................................................V-5 okilan 6010e connect for ip ....................V...

  • Page 200

    V - 4 section v - windows printing oki okilan 6010e user’s guide.

  • Page 201: For Windows Nt 4.0

    Windo ws printing v - 5 section v - windows printing oki okilan 6010e user’s guide chapter 1: okilan 6010e set up for windows nt 4.0 overview this section contains instruction and information on how to set up your okilan 6010e for a windows nt 4.0 environment. Print options for windows nt 4.0 includ...

  • Page 202: Installation

    V - 6 section v - windows printing oki okilan 6010e user’s guide installation to install okilan 6010e connect for tcp/ip, follow the instructions below: 1. Install the okilan 6010e connect for tcp/ ip files – see section i. 2. When installation is complete, click on start, settings and then printers...

  • Page 203: New Port.

    Windo ws printing v - 7 section v - windows printing oki okilan 6010e user’s guide 5. From the list of available printer ports, select oki okilan 6010e connect ip monitor as the type of port to add and click new port..

  • Page 204

    V - 8 section v - windows printing oki okilan 6010e user’s guide you will enter into the add okilan 6010e connect port screen where there will be a list of all okilan 6010e print servers available on the local subnet..

  • Page 205: 7. Click Ok.

    Windo ws printing v - 9 section v - windows printing oki okilan 6010e user’s guide 6. If the port you wish to add is listed in the ports available on local subnet: window, select the port name and click add. If the port you wish to use is not listed, click the locate non-local device button and ente...

  • Page 206: Okilan 6010E Connect For Dlc

    V - 10 section v - windows printing oki okilan 6010e user’s guide okilan 6010e connect for dlc okilan 6010e connect for data-link control (dlc) provides a direct printing solution for users in microsoft windows nt serverless environments with the dlc/ llc protocol. Print jobs printed through okilan ...

  • Page 207: Description

    Windo ws printing v - 11 section v - windows printing oki okilan 6010e user’s guide description an optional field where you may list the location or other useful information about the printer port. Using the windows nt 4.0 lpr print monitor a microsoft lpr print monitor is shipped with win- dows nt ...

  • Page 208: Install Lpr Print Monitor

    V - 12 section v - windows printing oki okilan 6010e user’s guide install lpr print monitor 1. Open the windows nt control panel. 2. Select the services tab. 3. Select add, then microsoft tcp/ip print- ing. 4. Click the close button. 5. Restart the system. Assign print server ip address 1. Using oki...

  • Page 209

    Windo ws printing v - 13 section v - windows printing oki okilan 6010e user’s guide 5. In the name or address of server providing lpd: field, enter the ip address you assigned to the printer. 6. In the name of printer or print queue on that server: field, enter the print server output port being use...

  • Page 210: 7. Click Ok.

    V - 14 section v - windows printing oki okilan 6010e user’s guide 7. Click ok. 8. Verify the port just added is selected and then click next. 9. Select a printer driver and click next. 10. Enter a name for the printer and click next. 11. To share the printers with others on the network, select share...

  • Page 211: For Windows Nt 3.51

    Windo ws printing v - 15 section v - windows printing oki okilan 6010e user’s guide chapter 2: okilan 6010e set up for windows nt 3.51 overview this section contains instruction and information on how to set up your okilan 6010e for a windows nt 3.51 environment. Print options for windows nt 3.51 in...

  • Page 212: Installation

    V - 16 section v - windows printing oki okilan 6010e user’s guide installation to install okilan 6010e connect for tcp/ip, follow the instructions below: 1. Install the okilan 6010e connect for tcp/ ip files—see section i. 2. From the windows nt print manager printer menu select create printer. 3. I...

  • Page 213: Okilan 6010E Connect For Dlc

    Windo ws printing v - 17 section v - windows printing oki okilan 6010e user’s guide okilan 6010e connect for dlc okilan 6010e connect for data-link control (dlc) provides a direct printing solution for users in microsoft windows nt serverless environments with the dlc/ llc protocol. Print jobs print...

  • Page 214

    V - 18 section v - windows printing oki okilan 6010e user’s guide install tcp/ip and lpr print monitor to install the lpr print monitor on your system, follow the steps below: 1. Open the windows nt control panel. 2. Double-click the network icon. 3. Select add software from the network settings win...

  • Page 215: Add Lpr Printer

    Windo ws printing v - 19 section v - windows printing oki okilan 6010e user’s guide assign print server ip address 1. Using okinet for ip, assign the print server an ip address; for example, 10.10.10.2. Note: for more information on using okilan 6010e tcp/ip, see okinet for tcp/ip. Add lpr printer 1...

  • Page 216: For Windows 95

    V - 20 section v - windows printing oki okilan 6010e user’s guide chapter 3: okilan 6010e set up for windows 95 overview this section contains instruction and information on how to set up your okilan 6010e for a windows 95 environment. Print options for windows 95 include: • okilan 6010e connect for...

  • Page 217: Installation

    Windo ws printing v - 21 section v - windows printing oki okilan 6010e user’s guide installation to install okilan 6010e connect for tcp/ip, follow the instructions below: 1. Install the okilan 6010e connect for tcp/ ip—see section i. 2. When installation is complete, click on start, settings and th...

  • Page 218

    V - 22 section v - windows printing oki okilan 6010e user’s guide you will enter into the add okilan 6010e connect port screen where there will be a list of all okilan 6010e print servers available on the local subnet..

  • Page 219: 7. Click Ok.

    Windo ws printing v - 23 section v - windows printing oki okilan 6010e user’s guide 6. If the port you wish to add is listed in the ports available on local subnet window, select the port name and click the add button. If the port you wish to use is not listed, click the locate non-local device butt...

  • Page 220: Okilan 6010E Connect For Dlc

    V - 24 section v - windows printing oki okilan 6010e user’s guide okilan 6010e connect for dlc okilan 6010e connect for data-link control (dlc) provides a direct printing solution for users in microsoft windows 95 serverless environments with the dlc/ llc protocol. Print jobs printed through okilan ...

  • Page 221: 7. Click Ok.

    Windo ws printing v - 25 section v - windows printing oki okilan 6010e user’s guide 5. In the add port window, select the radio button labeled other and select oki okilan 6010e connect dlc monitor as the type of port to add. Click ok. You will enter into the add okilan 6010e connect port screen wher...

  • Page 222: Port Settings

    V - 26 section v - windows printing oki okilan 6010e user’s guide you will now be able to use okilan 6010e connect for dlc. Whenever you print to the printer configured with okilan 6010e connect, your print job will go directly to the okilan 6010e print server port. Port settings if you have printin...

  • Page 223: Index

    Index-1 index oki okilan 6010e user’s guide index a advanced management features okinet alert ii-26 okinet for nds ii-27 okinet for tcp/ip ii-27 printer security for tcp/ip ii-28 security ii-7 assigning an ip address bootp iv-15, iv-71 dhcp iv-12 gleaning iv-11 rarp iv-15, iv-75 static route entry i...

  • Page 224

    Index-2 index oki okilan 6010e user’s guide custom views ii-27 customer information center vii customer service representatives vii customer support center vii customized views creating in okinet for netware iii-23 in okinet for tcp/ip iv-45 d default gateway ip address identifying in telnet iv-57 d...

  • Page 225

    Index-3 index oki okilan 6010e user’s guide stru iv-24 type iv-24 g get community name (tcp/ip) iv-39 gleaning assigning an ip address iv-11 h hp-ux v10.Xx application prerequisites iv-90 procedure iv-91 hp-ux v8.07 application prerequisites iv-80 procedure iv-81 hp-ux v9.Xx application prerequisite...

  • Page 226

    Index-4 index oki okilan 6010e user’s guide l language switching netware iii-14 n nds settings in netware iii-11 nprinter mode in netware iii-6 o okilan 6010e diagnostic information displaying in okinet for tcp/ip iv-43 okinet connect for dlc v-24 okinet connect for tcp/ip v-5, v-20 okinet for nds a...

  • Page 227

    Index-5 index oki okilan 6010e user’s guide output port configuration options in tcp/ip iv-34 output port configuration options in netware iii-13 p port configuration in netware iii-12 print queue configuring bsd-style iv-20 print server class adding or removing in okinet for nds iii-39 printer trap...

  • Page 228

    Index-6 index oki okilan 6010e user’s guide rprinter mode in netware iii-6, iii-11 s sco unix application prerequisites iv-95 procedure iv-95 security in snmp ii-7 service and support customer information center vii customer service representatives vii dealers vi regional service center viii set com...

  • Page 229

    Index-7 index oki okilan 6010e user’s guide requirements v-5, v-15 restoring to factory default configuration iv-61 static route entry iv-64 unable to assign ip address iv-62 unix bootp iv-63 winsock errors iv-66 tcp/ip configuration overview iv-8 tcp/ip network printing configuring for iv-17 telnet...

  • Page 230

    Index-8 index oki okilan 6010e user’s guide v verifying access to the okilan 6010e iv-16 view settings modifying in okinet for tcp/ip iv-46 view settings modifying in netware iii-24 w web configuration connecting to the okilan 6010e ii-16 okilan 6010e product discovery ii-23 overview ii-15 reset ii-...