Packet8 Virtual Office 6757i CT User Manual - Maki
132 — Model 6757i CT Series IP Phone User Guide
Maki
ng Call
s from
Cordless
Handset
Public Feature Key
A feature key is available in the feature list for the user to press, to toggle
between the Private and Public modes for a call. Pressing the Public
feature key
in the feature list anytime during a call, puts the call into the public call mode.
When the call is in public call mode, the triangle indicator lights in front of the
Public label in the feature list. This also causes that feature key to appear on an
available softkey but with a different label – Private. The user can then press the
Private softkey to toggle the call back to private, or he can navigate into the
feature list and press the Public feature key.
Either way, the triangle indicator clears and the call goes back to Private mode.
The following illustrations show the handset screens during public and private
calling.
In the figure above, the left screen depicts a call that is public. The user can
press the Private softkey at any time to make the call private – i.e. no extensions
are allowed to join. In the right screen, the right pointing triangle indicates the
current call is in public mode. The user could also select this feature key to return
the call to private.
Note: Any local caller on the call can convert the call. For instance, if one
cordless caller is on an external call, he can press the Public feature
key to make the call public. At that point up to three other handsets
can join in on the call. If any of those joining handsets presses the
Private softkey, the call is made private and no other users can join
the call unless the call was made public again.
Private Call in Progress
Corey
516-2681
00:00:00
Line 1
<13>
<14>
Public
PgDown Select
Feature List View with the Public
Key Selected but not Invoked
Public Call in Progress
Feature List View with the Public
Key Invoked but not Selected
Line 1
Line 2
Public
PgDown Select
Corey
516-2681
00:00:00
Private Line 1