Packet8 Virtual Office 6757i CT User Manual - Ne Keys and
Model 6757i CT Series IP Phone User Guide— 59
Li
ne Keys and
Softkeys
Creating a Speeddial Key Using the Packet8 Web Phone UI
Use the following procedure to set a key to function as a speeddial.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module
.
2. Click on the Bottom Keys tab or the Top Keys tab.
3. Select from "Key 1" through "Key 20" on the bottom tab or select from "Key
1" through "Key 10" on the top tab.
4. In the Type field, select Speeddial to apply to the softkey.
5. In the Label field, enter a label to apply to this softkey.
6. In the Value field, enter the phone number, extension, or speeddial prefix to
apply to this key. If you enter a speeddial prefix, you must enter the "+" char-
acter at the end of the prefix number (for example, "123456+").
7. In the Line field, select a line to apply to this softkey. Valid values are 1
through 9.
8. If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the states you want to apply to this softkey.
9. Click
to save your changes.
Packet8 Web Phone UI