Packet8 Virtual Office 6757i CT User Manual - Line Ke
68 — Model 6757i CT Series IP Phone User Guide
Line Ke
ys
and Softkey
s
Setting Callers List Key
Use the following procedure to configure a Callers List softkey on the 6757i CT
phone. The following illustration shows the top softkeys on the 6757i CT.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab or select from "Key
1" through "Key 10" on the top tab.
4. In the Type field, select Callers List.
5. In the Label field, enter a label to apply to this softkey.
6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable)
or uncheck (disable) the states you want to apply to this softkey.
7. Click
to save your changes.
Packet8 Web Phone UI
Note: By default, Key 3 on the top set of softkeys is configured for Callers
List.