Packet8 Virtual Office 6757i CT User Manual - Model 536Em A
Model 6757i CT Series IP Phone User Guide— 153
Model 536EM a
n
d
560E
M
Expansi
o
n Modu
les
2. The Auto-Answer field is enabled by default. The automatic answering feature
is turned on for the IP phone for answering Intercom calls. To disable this
field, uncheck the box.
3. The Microphone Mute field is enabled by default. The microphone is muted
on the IP phone for Intercom calls made by the originating caller. To disable
this field, uncheck the box.
4. The Play Warning Tone field is enabled by default. If Auto-Answer is enabled,
the phone plays a warning tone when it receives in incoming Intercom call. To
disable this field, uncheck the box.
5. The Allow Barge In field is disabled by default. If Allow Barge In is enabled,
the phone puts an active call on hold and answers the incoming Intercom call.
To enable the field, check the box.
6. Click
to save your settings.
Model 536EM and 560EM Expansion Modules
The 6757i CT IP Phone offers optional 536EM and 560EM Expansion Modules
that attach to the right side of the phone to provide additional softkeys.
Model 536EM
The 536EM provides 18 softkeys in each column (totaling 36 keys) on the
keypad. Each key provides an LED for indicating call status. The 536EM
provides a paper label for convenient key labeling.
Note: If the Auto-Answer field is not checked (disabled), the phone rejects
the incoming Intercom call and sends a busy signal to the caller.
Goodbye
Options
Hold
Redial
Line 4
Line 2
Line 1
Speaker/
Heading
Mute
Line 3