PAG Paglight C6 Instruction Manual - page 11
Switch-off the Paglight C6 before removing or replacing the plug-in
lamp holder. Allow the lamp to cool before removing it from the
lamp holder. Do not handle the lamp envelope directly. If it is
touched inadvertently, clean it with a lint-free cloth moistened
with methylated spirit.
SPECIFICATION:
Type: Halogen capsule.
Voltage: Nominal 6V.
Watts: 20W (10W and 30W available as accessories).
Colour Temperature: 3200°K at 6V (5600°K when using
dichroic filter).
Base: Type G4.
OPERATING INSTRUCTIONS:
Plug-in Lampholder System
The Paglight C6 features a unique plug-in lampholder system that
enables lamp wattage variants to be changed without touching the
lamp itself. The lamp holder with lamp can be stored in its heat
resistant polymer lamp protector.
Removing the Lampholder
IMPORTANT: First switch-off the Paglight C6. Gently press and turn
the lamp holder anti-clockwise and carefully withdraw it from the
rear of the unit.
Changing the Lamp
Remember that the lamp itself may remain hot for a considerable
period after being extinguished. It is advisable to use a cloth to
remove a failed lamp. The bi-pin lamp is a push fit into the lamp
holder. Do not twist or bend the legs when removing or replacing.
Do not handle the lamp envelope directly. If it is touched
inadvertently, clean it with a lint-free cloth moistened with
methylated spirit. Finger marks cause blackening of the glass,
and in turn hot spots, which lead to a reduction in life and
possible rupture of the glass. For users who change lamp wattages
frequently it is recommended that a lamp holder is purchased for
each wattage variant.
9