PAG Paglight C6 Instruction Manual - page 7
Perfect Positioning
The support base of the lamp head is a multi-directional mounting
which allows the light to be adjusted vertically and horizontally.
The pivot points are friction-adjustable to maintain the desired
position in all situations of use.
Mounting
The Paglight C6 Kit is supplied with a square shoe plate, allowing
the unit to be mounted to camcorders with an accessory shoe.
The light base incorporates a ¼” Whitworth bush that enables it to
be used with other PAG mounting options, such as a ¼” Whitworth
stud adaptor (Model 9971), a handle for hand-held operation
(Model 9906) and a camera clamp for mounting to non-standard
fittings (Model 9807).
The Paglight C6 base is fitted with a flying lead terminated with a
professional-quality connector, incorporating gold-plated contacts,
for connection to the C6 Power Pack.
PAG C6 Power Pack
Paglight C6 is powered from its own 6V 7Ah battery, supplied as
part of the kit. This rechargeable Ni-Cd battery, weighing little
more than 1kg, has a detachable shoulder strap. The battery, when
fully charged, will provide two and a quarter hours of run-time with
a 20W lamp. An additional battery will enable you to shoot for a
whole day. A belt clip (Model 1022) can be used in place of the
shoulder strap. Once fitted to the back of the battery it can be
worn on your trouser waistband or belt.
PAG C6 Power Charger
A battery charger is supplied that will charge the battery in three
to four hours, from fully discharged. It will automatically recover
the battery, prior to fast-charging, if the battery has been deeply
discharged. The charger also provides a maintenance top-up charge
after full charge. These automatic functions are indicated by a
single LED. The charger has an interchangeable AC power plug. UK,
Euro, US/Japan and Australia plug options are available.
5