PAG Paglight C6 Instruction Manual - page 18
OPERATING INSTRUCTIONS:
Fit the mains input plug supplied, to the charger, by pushing
it fully onto the charger body. Connect the charger to a suitable
AC supply (see Safety Instructions).
Charging the Battery
The charging output lead is terminated with a self-locking
connector which is polarised with a keyway to ensure that the
correct charging polarity is maintained.
ON NO ACCOUNT USE FORCE TO ENGAGE THE PLUG INTO THE SOCKET.
The self-latching system will maintain the connection and only
a deliberate pull on the plug’s outer shell will release the
connector. Do not pull on the lead itself.
WARNING: Never carry or suspend the battery from the lead. Never
force the plug into the socket when misaligned. A reverse polarity
connection will irreparably damage the charger and invalidate the
warranty.
Once correctly connected, charging will commence, and the LED will
be lit continuously.
When charging is complete a trickle maintenance charge will be
applied and the LED will blink steadily.
A low rate recovery charge will be given if the battery is in
a poor or over-discharged condition, indicated by the LED
flashing rapidly.
16