PAG Paglight C6 Instruction Manual - page 12
The Lamphead
The lamphead incorporates a tilting facility with a friction locking
mechanism. From the horizontal position, the lamp head can be
angled downwards by 15 degrees, and upwards by 60 degrees.
Focussing
Focussing is provided by a lever on each side of the lamp body,
and is continuously variable from narrow to wide angle, thereby
increasing or decreasing light intensity.
Cool-Running
The lamp head is designed around a patented heat dissipation
system, which allows external parts of the light to operate
at a far lower temperature than other models currently on
the market. However, the light should not be operated with
the barn doors fully closed.
A special toughened, heatproof safety glass is provided at the front
of the light, for protection. Never operate the light if this glass is
broken or missing.
Do not operate the light in the vicinity of highly combustible
materials, especially explosive heavy vapours. Never leave the light
turned on while unattended. Do not obstruct the airflow through
the cooling vanes.
The Paglight C6 Base
The base incorporates a captive locking mechanism. A standard ¼”
Whitworth thread in the base of the Paglight C6 enables, amongst
other things, a square shoe plate to be fitted (included). This
enables the Paglight C6 to be fitted directly to any camera
equipped with an accessory shoe. Always tighten the locking wheel
firmly to secure the base, while retaining the swivelling facility.
Barn Doors & Filters
The rotatable accessory ring fits onto the front of the light, and is
supplied with two snap-in filters and two barn doors. The accessory
ring can be adjusted to rotate or locked in position with the
knurled screw. To remove the accessory ring, unscrew the knurled
locking screw completely, and expand the ring over the front rim of
10