PAG Paglight C6 Instruction Manual - Section 4
SAFETY INSTRUCTIONS:
Please read these instructions fully and note all warnings before
using the C6 Power Charger.
THIS PRODUCT IS NOT INTENDED FOR ANY USE OTHER THAN THE
CHARGING OF PAG ‘C’ SERIES RECHARGEABLE BATTERIES.
IMPORTANT: Use only on AC supplies 100-240V, 50-60Hz. Supply
connection to the unit must be made using only the special mains
input plug designed for this equipment. Interchangeable power plugs
are available for use in UK, Europe, USA/Japan and Australia.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
WARNING: Indoor use only. To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
Do not disassemble or modify any part of the C6 Power Charger.
There are no user-serviceable parts inside. Incorrect reassembly may
result in a safety hazard.
SPECIFICATION:
Model No. 1002
For use with PAG ‘C’ series batteries, Nickel-Cadmium and Nickel-
Metal Hydride, 5-6 cells / 2.5-10Ah.
Input: 100-240V~ / 50-60 Hz / 450mA / 31W.
This equipment is double insulated. An earth connection is not
required.
Output: 5-10.5V DC / 2A
Charge time (C6 battery): approximately 3½ hours from fully
discharged.
C6 POWER CHARGER
SECTION 4
15