PalmOne Treo 650 User manual - Creating Trusted Pairs

72

Using Your Device’s Phone Features

Creating Trusted Pairs

After you set up a Bluetooth wireless connection with your computer or other 

accessory devices, you may want to set up other trusted devices, such as a friend’s 

handheld. When your Treo recognizes a trusted device, it automatically accepts 

communication, bypassing the discovery and authentication process.

1.

Go to Applications 

 and select Bluetooth 

.

2. Select Setup Devices.

3. Select Trusted Devices. 

4. Select Add Device. (The Discovery icon appears to indicate that the discovery 

process is active.)

5. Select the device you want to add as a trusted device. (If the device you want 

to add isn’t on the discovery results list, select Find More to search again.)

6. Enter the same passkey on your device and the other device, and then 

select OK.

7. Select Done.

After you set up your Bluetooth wireless connections and trusted pairs, you can 

check the Allow only trusted devices to connect box for added security protection.

Important

Some devices with Bluetooth wireless technology have a built-in passkey; others let you 

select the passkey. In either case you must use the same passkey on both the other 

device and your Treo. See the documentation for the device with Bluetooth wireless 

technology for additional information.

Note:

Make sure you close the 

Bluetooth

 application after you set up devices and trusted pairs.