ProVu TelePhoSee WVP-2100 User Manual - User’S Manual
User’s Manual
WOOKSUNG
39
Basi
c
Setup
WVP-2100
WVP-2100W
WVP-2100S
■
■
■
SIP Network Setup
Server Setup (Configuration
▶
Network
▶
Server)
1
Display the ServerConfiguration menu through the NETWORK
TYPE setup sequence or by selecting the SERVER icon on the
Network menu.
2
Select ON to configure the server. Select NEXT.
Select OFF if you are not subscribed to a SIP service.
3
Enter the SIP server IP address, Server Port, your User ID,
Password, and Expire Time (Expires).
4
Select NEXT to review your settings.
5
Select APPLY to apply your server settings.
ServerConfiguration
05/04 09:00 AM
Previous
Apply
Cancel
Network Type: Fixed IP
IP Addr : 10.1.2.5
NetMask: 255.255.255.0
Gateway : 10.1.1.1
DNS : 202.30.143.11
Server Configuration: Use
Server Addr: proxy.com
Port: 5060
User: user1@proxy.com
Password: password
Notes: Expired Time
This is the amount of time Proxy server registration is valid, after which the
videophone automatically renews registration. Default is 3600 seconds, but
the time recommended by the Proxy server is usually set.