ProVu TelePhoSee WVP-2100 User Manual - User’S Manual
User’s Manual
WOOKSUNG
73
Adva
nced
U
se
WVP-2100
WVP-2100W
WVP-2100S
■
■
■
1
Press the F1 button during a video conversation to send a still
image. The OSD will display STILL IMAGE TRANSFERING. When
sending is complete the screen will display your contact’s video
again.
2
Your contact’s videophone OSD will display STILL IMAGE
RECEIVING. When receiving is complete your contact’s videophone
will display the still image. Your contact can press the F3 button to
return to video.
Sending a Quality Still Image
H.261 Annex D
Recommendation H.261 Annex D Graphic Transfer mode reads and
interleaves four decoded pictures to resulting in a higher resolution
graphic picture. This is a particularly useful feature when you want to
send an image of a document, an action that normally requires higher
resolution for easier recognition .
H.261 video codec with CIF resolution must be enabled on both calling and
receiving phones. (Refer to Codecs)
Sending your still image
Receiving your contact’s still image
1
Press F2 to receive your contact’s still image. The OSD will
display STILL IMAGE RECEIVING. When receiving is complete your
contact’s still image will be displayed. You can press the F3 button to
return to video.
2
Your contact’s videophone OSD will display STILL IMAGE
TRANSFERING. When receiving is complete your contact’s display
will return to video.