ProVu TelePhoSee WVP-2100 User Manual - User’S Manual
User’s Manual
WOOKSUNG
43
Basi
c
Setup
WVP-2100
WVP-2100W
WVP-2100S
■
■
■
IP Sharing
Videophone Setup
1
Go to the IP Share Menu through the IP SHARE icon on the
Network Menu.
2
Set the IP Sharing category to USE if you want to use the IP
sharing feature.
- Set to NO USE if you are not using IP sharing, and want to use your
videophone as a basic dummy hub.
3
Set the Gateway setting.
- The default factory setting is192.168.2.1
- If you are using more than one TelePhoSee unit with IP Sharing enabled in
your network, set the gateway setting in each phone to 192.168.2.1,
192.168.3.1, 192.168.4.1, 192.168.5.1….. respectively.
4
Set the Netmask setting.
- The default factory setting is 255.255.255.0.
Unless you know your network very well, we suggest that you do not change
this setting.
5
Select APPLY to apply your settings.
IP Share
05/04 09:00 AM
IP Share
Gateway
Netmask
Use
192.168.2.1
255.255.255.0
Apply
Reset
Back
Continue on next page
for computer settings…