ProVu TelePhoSee WVP-2100 User Manual - Telephosee Wvp-2100 Series
TelePhoSee WVP-2100 Series
WOOKSUNG
76
Adva
nced
U
se
WVP-2100
WVP-2100W
WVP-2100S
■
■
■
Serial Communication
You can use the serial jack (RS-232C) on the back of the videophone
for data communication to external devices. Currently digital
stethoscopes and headphones for use during tele-medicine sessions
are applied. Future applications including blood pressure and glucose
diagnostic equipment are also in development.
1
Connect the device’s serial adapter to the serial jack
located on the back of the phone.
IMPORTANT: ONLY USE SERIAL CABLES
APPROVED BY WOOKSUNG ELEC.
2
Go to the SERIAL COM. menu from the MAIN MENU by selecting
CONFIGURATION – NETWORK – SERIAL COM.
3
Select the USE field and set to
SENDER for a transmitting
device (ex: stethoscopes) and
RECEIVER for a receiving
device (ex: headphones).
4
Set the other settings
according to the serial device.
Example: for digital stethoscopes
and headphones
SPEED: 9600, DATABIT: 8,
PARITY: NONE, STOPBIT: 2
5
Select APPLY.
Serial communication will start when
your call is connected.
Serial Comm
05/04 09:00 AM
Use
Speed
DataBit
NoUse
9600
8
Parity
None
StopBit
2
Apply
Reset
Back