PSA Products LIFESAVER LIFPE10 User Manual - page 13
13
Trouble shooting Guide
Problem
Method
Smoke alarm device does
not sound when tested.
1.
Fit the alarm on the bracket and
turn the alarm body clockwise,
until its fixed.
2.
Clean smoke alarm device.
Please refer to the “maintenance
and cleaning” section.
3.
If there are still failures during
warranty, you can return to your
retailer.
4.
If the unit is out of warranty,
please replace another new
alarm.
The alarm “chirp” with red
LED flashes once every
40 seconds.
The battery is under low battery
status. Please replace the smoke
alarm.
Smoke alarm device chirp
occurs every 40 seconds
(alarm goes into fault
mode).
Clean smoke alarm device. Please
refer to the “maintenance and
cleaning” section. Purchase and
change another smoke alarm
device if the problem still exist
Smoke alarm device
sounds unwanted alarms
intermittently or when
residents are cooking,
taking showers, etc.
1. Press test button to pause alarm.
2. Clean smoke alarm device.
Please refer to the “maintenance
and cleaning” section.
3. Move smoke alarm device to new
location and press test button.
The alarm sounds
different from it used to. It
starts and stops.
1. Clean smoke alarm device.
Please refer to the “maintenance
and cleaning” section.
2. If there are still failures during
warranty, you can return to your
retailer.
3. If the unit is out of warranty,
please replace another new
alarm.