Qcom LR802UKN3 User Manual - Tcb
TCB
GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
Curtis-Straus LLC
527 Great Road
Littleton, MA 01460
Date of Grant: 09/08/2009
Application Dated: 09/07/2009
Qcom Technology Inc.
7F, No. 178, Ming Chuan E. Rd. SEC 3,
Taipei,
Taiwan
Attention: Clark Tsai , engineer Manager
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and
is VALID ONLY for the equipment identified hereon for use under the
Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
RUJ-LR802UKN2
Name of Grantee:
Qcom Technology Inc.
Equipment Class: Digital Transmission System
Notes:
802.11 b/g/n Wireless USB Module
Modular Type:
Limited Single Modular
Grant Notes
FCC Rule Parts
Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C
2412.0 - 2462.0
0.115
Output power listed is conducted. Device is a 1T1R draft 802.11bgn module. Limited
Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20cm from
all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. Approval is limited to OEM installation only. OEM integrators
must be provided with antenna installation instructions. OEM integrators and end-Users
must be provided with transmitter operation conditions for satisfying RF exposure
compliance. This grant is valid only when the device is sold to OEM integrators and the
OEM integrators are instructed to ensure that the end user has no manual instructions
to remove or install the device. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter.
第 1 頁,共 1 頁
FCC - OET TCB Form 731 Grant of Equipment Authorization
2009/9/9
https://gullfoss2.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm?mode=COPY&RequestTimeout...