Quantum GoVault 40GB Quick Start Manual - page 6
6
Installing the Internal GoVault Dock
Quick Start Guide
Figure 5 Connecting the SATA
Data Cable to the SATA Card
8
Connect the drive end of the SATA power supply conversion adapter cable to the
SATA power connector on the back of the internal GoVault dock (see
figure 6
).
Figure 6 Connecting the SATA
Power Cable to the Dock
9
Connect the power supply end of the of the SATA power supply conversion adapter
cable to the computer power harness connector (see
figure 7
).
Figure 7 Connecting the SATA
Power Cable to the PC
10
Reinstall the system cover and reconnect the AC power cord to the facility AC power
receptacle.
11
Restart the workstation or server system.
12
Verify that the LED on the front panel of the GoVault dock illuminates when the
system restarts.
13
Insert a GoVault cartridge into the dock and verify that the front panel activity LED
indicator signifies a successful cartridge load operation (see
Inserting Cartridges
on
page 11).
SATA data cable
SATA data connector
SATA card (top view)
SATA DC power connector
SATA power supply conversion
adapter cable
SATA power supply
conversion adapter cable
Computer power harness connector