Quantum GoVault 40GB Quick Start Manual - page 9
Installing the GoVault System Application Software
9
GoVault™ for Windows
Installing the GoVault System Application Software
Use one of three system application applets on the GoVault Resource CD to install the
GoVault system application software.
Each applet provides an installation package that corresponds to one of the three types of
supported operating systems:
•
x64
•
x86
•
IA64
To install the internal GoVault system application software, complete the following
procedures in the order presented:
1
Determining Which System Application Applet to Use
2
Installing the GoVault System Application Software
Determining Which
System Application
Applet to Use
0
To find out which system application applet you need to use:
1
From the
Start
menu on your PC, right click
My Computer.
2
Select
Properties
.
3
On the
General
tab, under the
System
heading, look for the words
x64 Edition
.
Installing the GoVault
System Application
Software
0
After determining which system application applet you need to use, install the GoVault
system application software on your workstation or server system as follows:
1
Insert the GoVault Resource CD into the CD-ROM drive.
2
Browse the CD contents to find the
SetupGoVault.msi
file for the appropriate system
application applet.
3
Double-click the
SetupGoVault.msi
file to launch the GoVault Setup Wizard.
4
Follow the screen prompts to complete the GoVault system application software
installation.
5
As prompted, when the installation completes, click
Close
on the
Installation Complete
dialog to exit the GoVault Setup Wizard.
6
Remove the GoVault Resource CD from the CD-ROM drive.
IF...
THEN use the... system application applet
you see
x64 Edition
,
x64
you do not see
x64 Edition
,
x86
the system is a 64-bit Itanium,
IA64