Document 81-81453-02 a01, january 2006 1 quantum px502 chassis repacking instructions introduction 3 removing the library from the rack 3 installing the internal shipping restraints 6 packing the library for shipment 12.
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 made in the usa. Quantum corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a p...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 introduction 3 introduction 0 this document explains how to repack the quantum px502 library. Follow these instructions carefully to ensure the library is shipped properly. Note: all px500 series documentation is loca...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 4 removing the library from the rack 3 from the back of the library, disconnect all power, ethernet, and scsi cables from the library and note their locations for later reinstallation. Warning: this unit has more than...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 removing the library from the rack 5 figure 1 removing the px502 library power supplies tape drives right magazine.
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 6 installing the internal shipping restraints installing the internal shipping restraints 0 to ensure that the internal robotics within the library is not damaged, you must install the internal shipping restraints on ...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 installing the internal shipping restraints 7 2 if the library is not operational and the park for shipping command was not executed, grasp the robotics and gently move it to the front of the library (see figure 3 ). ...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 8 installing the internal shipping restraints figure 4 installing the metal restraints metal restraints eyelet 4 install the two halves of the robotics shipping foams as shown in figure 5 : a install the left-hand foa...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 installing the internal shipping restraints 9 figure 5 installing the robotics restraints robotics assembly shown outside of library for clarity. Right-hand shipping foam robotics motor left-hand shipping foam foam in...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 10 installing the internal shipping restraints figure 6 securing the robotics tie band 6 install the top covers previously removed in step 1 . 7 install the tape drives, and power supplies previously removed in removi...
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 installing the internal shipping restraints 11 figure 7 opening the right and left magazine access doors right magazine door door releases left magazine door 9 install the tape cartridge magazines..
Quantum px502 chassis repacking instructions document 81-81453-02 a01 january 2006 12 packing the library for shipment packing the library for shipment 0 1 package the library into the shipping carton as shown in figure 8 . Ensure that the library chassis is placed in an antistatic bag before placin...
