Quantum PX502 Introduction Manual - page 6
Quantum PX502 Chassis Repacking Instructions
Document 81-81453-02 A01
January 2006
6
Installing the Internal Shipping Restraints
Installing the Internal Shipping Restraints
0
To ensure that the internal robotics within the library is not damaged, you
must install the internal shipping restraints on the robotics.
Caution:
Failure to install the shipping restraints on the robotics may
void your warranty.
To install the internal shipping restraints:
1
Place the library on a flat surface and remove the twelve PHILLIPS screws
securing the FlexLink™ cover and top cover plate to the library chassis
(see
figure 2
):
Note:
If the bottom FlexLink cover has been removed, replace it
before shipping the library back to Quantum.
Figure 2 Removing the
Top Cover
Top cover
FlexLink cover