Quik N’ Crispy GF – II Operator's Manual - page 12
©2016 QNC, Inc. 0601 230V ECOM
Page 12
RECALIBRATING THE TOUCH SCREEN
The LCD Touch Screen Control Panel has been calibrated at our factory prior to
shipping your Quik n’ Crispy. However, if you determine that the calibration isn’t
accurate, it’s easy to recalibrate the touch screen.
1. Turn the Quik n’ Crispy on and wait for the Quik n’ Crispy logo screen to
appear. Using your finger or stylus, hold down on the logo screen for 5
seconds until you hear a double beep.
2. The next screen will read “Performing touch screen calibration”. Touch
the screen to continue.
3. You will then have 4 circles appear, one at a time, in each corner of the
screen. Press and release on each of the filled circles. If you are satisfied
with the initial calibration then touch the screen to continue. If you wish
to do over, repeat the process from Step 1.