Quik N’ Crispy GF – II Operator's Manual - page 14
LCD Controller User’s Manual
CONFIGURATION ACCESS
Access to the controller configuration has three security levels: Supervisor, Technician, and Factory. This
manual will only address the Supervisor level. This level has access to the recipe editing, beeper
configuration, changing the access code, temperature display units (°F/°C), and display language.
To gain access to the configuration, press and hold the area shown below in the main menu list until the
controller emits a double chirp. The initial press will not cause an initial chirp to prevent accidental access
to these features.
Press and hold here
until the double chirp
X
Once the controller chirps twice, release your finger and the access code entry window appears as shown
below. The default supervisor access code is 1234. Enter the code using the numeric keys (a * is displayed
for each digit) and press the [Enter] button. The [Delete] button deletes the last character, [Clear] deletes
everything.
Page 14