Quik N’ Crispy GF – II Operator's Manual - page 8
©2016 QNC, Inc. 0601 230V ECOM
Page 8
POSITIONING THE SEPARATION WALL AND SPLASHGUARD
WARNING!
Before proceeding, make sure the Quik n' Crispy power switch is in the “OFF”
position (this is the left position of the On/Off Switch) and that the fan blower is
stationary and that the cooking chamber and heating element are not hot!
1.
Lift the Removable Front Panel (RFP) that is located directly above the
Cooking Basket by applying slight upward pressure. It should slide out at an
upward angle.
2.
Pull the Splashguard out of the top of the cooking chamber. This is a
formed piece of stainless steel that is located between the heating element
and the ceiling of the inner chamber. When inserted into the cooking
chamber, the surface of the splashguard should be in contact with the
ceiling of the chamber. The splashguard should be removed daily for
cleaning with the other removable items located in the inner chamber.
Separation Wall Cutaway View
3.
The Separation Wall was positioned properly in the rear of the inner
chamber of your Quik n’ Crispy prior to shipping. It is held in place by