QuStream AAB6214 Technical Manual - page 12
I
NTEGRITY
600
–
AES600
F
AMILY
Publication 81-9059-0632-0, Rev. A
June 2008
Proprietary Information of QuStream
3-5
The mating plug used with the on-board connectors is a solderless type and uses a spring clamp to
securely hold input or output cable wires. Connections are made by inserting the wire end into the round
receptacle on the plug. The small square hole beside each wire receptacle contains a spring release that
loosens the clamp and allows the wire to be removed from its associated receptacle. To remove a wire,
simply insert the blade of a small flat tip screwdriver into the release hole adjacent to the receptacle
containing the wire you wish to remove, and gently pull the wire from the receptacle.
In
Out
Out
Out
Out
AAB6214
1 & 2
Out
1.1
&
2.1
Out
1.2
&
2.2
Out
1.3
&
2.3
Out
1.4
&
2.4
Out
1.5
&
2.5
Out
1.6
&
2.6
Out
1.7
&
2.7
IN 1
DISTRIBUTION
AMPLIFIER 1
ANALOG AUDIO
INPUT
OUT 1.1 – OUT 1.7
DISTRUBITION
AMPLIFIER 1
ANALOG AUDIO
OUTPUTS 1 - 7
IN 2
DISTRIBUTION
AMPLIFIER 2
ANALOG AUDIO
INPUT
OUT 2.1 – OUT 2.7
DISTRIBUTION
AMPLIFIER 2
ANALOG AUDIO
OUTPUTS 1 - 7
Figure 3-3 AAB6214 Module - Rear Panel Connections