QuStream AAB6214 Technical Manual - page 17

Integrity 600 – AAB6214 Analog Audio DA 

Publication 81-9059-0631-0, Rev. A 

July 2008

Proprietary Information of

Q

U

S

TREAM

4-2 

by pressing the touch-switch next to the 

Linking: On/Off

 menu item to toggle the linking function on 

or off. 

The Linking menu entry indicates the current active status of the signal linking function. When the 

linking function is not active (off), the gain of each audio input signal may be independently adjusted as 

required by rotating the control knob beneath the channel number display, as shown in Figure 4-1.  

When Linking is set to On as shown in Figure 4-2, the audio channels are shown as being paired with a 

single gain control.  Gain for the linked pair may be adjusted as required by rotating the control knob 

beneath the channel pair display.  Balance between the two channels may be adjusted as required by 

rotating the Balance control beneath the channel pair display. 

Figure 4-2  Main Menu Screen Showing Linked Audio Channels 

RESET 

Pressing the touch-switch next to the 

Reset 

menu entry accesses the Reset Values Menu Screen, 

discussed in Paragraph 4.3. 

MORE

Pressing the touch-switch next to the 

More

 menu entry brings up screen 2 of the main menu, discussed 

in Paragraph 4.4.   

4.3

R

ESET 

V

ALUES 

M

ENU 

S

CREEN

The Reset Values Menu Screen, Figure 4-3, displays the current settings for each audio signal along the 

bottom edge of the display screen.  Resetting the values returns each setting to the factory default.  Press 

the touch-switch next to the 

YES

 menu entry to accept and execute the reset function.  Select the 

NO

menu entry to retain the current set values and return to the main menu display.