R82 Rabbit User Manual - page 10
10
A
e
2
1
3
B
C
D
G
B
GB
MoUnTinG AnD
ADjUSTMenT of
inDiviDUAl fooT
SUPPoRTS
follow the description below to mount the
foot supports correctly. The foot supports are
mounted seperately and can be adjusted indi-
vidually.
* The square plates mounted on the foot sup-
port, should be mounted in the slot on the
centre bar as for the foot plate.
* Adjust the height and fasten the screw (A)
using the 6 mm Allen key.
Tip!
in general we recommend to mount all acces-
sories from the top of the centre bar which is why
the lower accessories must be mounted first.
loosen the screws (B) to adjust the height and
angle of the foot supports. Adjust the foot plate
sidewise (C) and in depth (D). loosen the screws
(e) to adjust the angle of the foot plate. Make
sure to fasten the screws (D) and (e) in the re-
commend order; 1, 2, 3.
Make sure that all screws are fastened
securely before use.
GB
SPoKe
PRoTeCToRS
follow the description below to mount spoke
protectors on the Combi frame:
1) Place the protector on the spokes
2) Mount the enclosed clips through the holes in
the spoke protectors and click into place on
the spokes.