R82 Rabbit User Manual - page 14
14
C
B
C
D
B
A
A
G
B
HiP SUPPoRTS De-
RoTATion
follow the description below to mount the hip
supports de-rotation correctly:
* Dismount the two fittings (A) from the de-ro-
tational hip supports.
* Mount the fittings on both sides of the centre bar.
fasten the screws (B) in the desired position.
The possiblity of rotational adjust is available
before the screws are fastened completely.
* Mount the hip support on the fitting (C). fasten
in the desired angle.
* loosen the screws (D) to adjust the hip sup-
port sidewise and in height. fasten all screws
in the desired position.
HiP SUPPoRT,
fRonT
follow the description below to mount the hip
support correctly.
* Mount the two square plates in the slots on
both sides of the centre bar.
* Mount bolts (A) in the upper square plates and
fasten slightly. Do not fasten completly before
the four bolts have been placed correctly.
* Mount bolts (B) in the lower square plates.
Move the bolts (A) + (B) and plates upwards
until they fit into the fitting from the hip sup-
port. now fasten all four bolts securely using
the enclosed 6 mm allen key.
* loosen the bolts (C) and adjust the hip sup-
ports in depth. fasten the bolts in the desired
position.
GB
GB