R82 Rabbit User Manual - page 11
11
C
C
A
D
A
B
A
B
B
C
G
B
GB
MoUnTinG of fliP-
UP SAnDAlS / Heel
SUPPoRTS
follow the description below to mount the flip-up
sandals / heel supports correctly.
* Place the enclosed bolt (A) in the slot from the
top of the footplate/heel support and fasten
with the fingerscrew (B).
* The flip-up sandal / heel support can be ad-
justed forward or/and backward depending
on the desired placement (C). fasten the
screw beneath the foot plate in the desired
position.
Knee SUPPoRTS
follow the description below to mount the
knee supports correctly. The knee supports
are mounted seperately and can be adjusted
individually.
* The square plates on the knee support is
mounted in the slot on the centre bar.
* Adjust the knee support in too the desired
height and fasten (A) using the enclosed 6
mm allen key.
Make sure that the fitting (B) is in the
vertical position when the knee support is
mounted. (not for size 1).
* loosen the screw (C) and adjust the angle of the
foot support. fasten in the desired position.
* loosen the screw (D) and adjust the knee
supports sidewise.
GB