Racers Edge SureCharge 2000 LiPo Operating Manual - page 3
SPECIAL FEATURES
Safety Programming
The automatic charge termination program is based on the principle of the Delta-Peak volt-
age detection. When the battery’s voltage exceeds the threshold, the charging process will end
automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH bat-
tery: This is helpful for NiMH batteries of low impedance and capacity in the ‘Auto’ charging
mode.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the
charging capacity exceeds the limit, the process will be terminated automatically when you set
the maximum value.
Temperature Threshold
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the
temperature limit is reached, the process will be terminated. This function is available by con-
necting the optional temperature probe, which is included in our case.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
SPECIAL FEATURES
Power Input Monitoring
To protect the DC input source form being damaged, like a car battery, its voltage keeps being
monitored. If it drops below the lower limit, the charging process will be ended automatically.
Data store/load
The maximum five batteries’ data can be stored for users convenience. You can keep the data
pertaining to program setting of the battery for continuous charging or discharging. Users can
call out these data at any time without any special program setting.
Cycle Charging & Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for
battery refreshing and Balancing to stimulate the battery’s activity.
The Squid’ Charging Adaptor Included
Connectors for Traxxas HC, Ultra, Tamiya, JST, Receiver, Glow Igniter, and extra leads for your
own customization.
4
5