Racktivity ES2000 Seriesl User Manual - Quick Configuration
© 2011 Racktivity NV
17/52
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com
v 2014.3.27
Quick Configuration
Using the TFT Panel Display
Activating the Display
When the Power LED is lit and the screen is black, push any of the 4 navigation buttons next to
the TFT Display to activate it. The TFT Panel standby delay can be set at the Settings page on the
Web Interface (the default value is 10 minutes).
Controlling the Display
The TFT Panel is controlled using the UP, DOWN, MENU and OK buttons next to the screen.
Use the UP and DOWN buttons to navigate through the reporting screens or through a selection
list in the menus. Press OK to select the highlighted item and MENU to go back.
When in a menu, the ">" symbol indicates that clicking this item will open a submenu. The "●"
symbol indicates that this menu item leads directly to a setting.
Hot Keys
Several Hot Key combinations are available by using the navigation buttons next to the display.
To activate the functions, press the necessary buttons simultaneously for 4 seconds (until a
notification is shown on screen).
Hot Key
Buttons
Action
Hot Reset
MENU + DOWN
Reboots the device
No outlets toggled, no settings changed
Credential Reset
UP + DOWN
Resets the login credentials
No outlets toggled, login credentials set to default
Factory Reset
MENU + OK
Resets all non-power related settings to factory
defaults (network, …), no outlets are toggled