Racktivity ES2000 Seriesl User Manual - Network Configuration
© 2011 Racktivity NV
28/52
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com
v 2014.3.27
Network Configuration
path: Settings > Network Settings
The Network Settings contains both the Network and the SNMP related settings. The SNMP
related settings can be found in the SNMP Configuration chapter. The following Network settings
are editable:
Device IP Address
o The IP address of the EnergySwitch*
Subnet Mask
o The subnet mask of the EnergySwitch
Standard Gateway
o The IP address of the default node on the network
DNS Server
o The IP address of the Domain Name System (DNS) server
Enable DHCP
o Check to enable DHCP
Force secure web access (HTTPS)
o Check to force secure HTTP web access
Force secure telnet access (SSL)
o Check to force SSL telnet access
* Note: When DHCP is enabled, the Network Settings are not necessarily the ones shown here,
since they are provided by the DHCP server. Disabling DHCP will force the EnergySwitch
to use the provided Network Settings.