Racktivity ES2000 Seriesl User Manual - Tabs
© 2011 Racktivity NV
26/52
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com
v 2014.3.27
Tabs
Power
Use the Power Tab for the following:
See the load and general status of both the EnergySwitch’s individual outlets and the
totals:
o Amps
o Wattage
o Power Factor
o Energy (kWh)
o Apparent Energy (kVAh)
o Voltage
Control and manage outlets
Configure thresholds for connected loads, banks (as applicable)
Resetting measurements
Change SNMP notifications for power related parameters (outlet toggle, amps, wattage)
Manage outlet scheduling
Control fuse and/or line currents
Oscilloscope view for an outlet
Overview of connected Agents
Environment
Use the Environment Tab to monitor and manage:
Internal sensors (as applicable)
Voltage: status, history and management
Logging
The logging tab provides access to both the Event and the Detailed logging. After selecting the
desired module and time-range the log can be downloaded or viewed inside the browser.
For more information regarding this subject, please refer to the Logging chapter.
Modules
Use this tab to control connected Energy Sensors.
For more information regarding the modules tab, please see the Energy Sensor documentation.
Note: This tab is available as of firmware version 1.2 and above; and with a managed Energy
Sensor.