RAD DIGITAL B- User Manual - page 19
Digital B-RAD USER MANUAL
New World Technologies Inc.
Page • 17
V2014.07.03
4. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Clock”
option.
5. Press the “Centre” button to select the “Clock” option.
Result: The Clock Setting screen will be displayed (Figure 3.3.10-3).
Figure 3.3.10-1: Main Menu Screen
Figure 3.3.10-2: Setup Menu Screen
Figure 3.3.10-3: Clock Setting Screen
6. Use the navigation buttons and the keyboard to select and edit the time and date.
Note: Use the “Up Arrow” button to move horizontally (⟷) across the keyboard. Use the
“Down Arrow” button to move vertically (↕) on the keyboard. Use the “Centre” button to
select the highlighted character. Select the “Check Mark” key (√ ) on the keyboard to enter.
Select the “Back Arrow” key (⟵) to delete the previous character. Select the “Cancel” key
(∅) to return to the Clock Setting screen without making a change.
7. Use the navigation buttons to highlight and select the “Save” option to save and
exit or the “Exit” option to exit without saving.
3.3.11 Clear Maintenance Cycles
This function allows the operator to clear the statistics in Maintenance Cycles.
To clear Maintenance Cycles:
1. Press the “Centre” button.
Result: The Main Menu screen will be displayed (Figure 3.3.11-1).
2. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Info”
option.
3. Press the “Centre” button to select the “Info” option.
Result: The Info Menu screen will be displayed (Figure 3.3.11-2).
Figure 3.3.11-1: Main Menu Screen
Figure 3.3.11-2: Info Menu Screen
4. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Zero
Maint” option.
5. Press the “Centre” button to select the “Zero Maint” option.